[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [SPAM][EquisMetaStock Group] Re: Dynamic Breakout system - How to speed it up?



PureBytes Links

Trading Reference Links



Preston:

 

My thanks for your timely and complete reply.

 

Regards

 

Lionel

 

From: equismetastock@xxxxxxxxxxxxxxx [mailto:equismetastock@xxxxxxxxxxxxxxx] On Behalf Of pumrysh
Sent: Wednesday, May 27, 2009 1:34 AM
To: equismetastock@xxxxxxxxxxxxxxx
Subject: [SPAM][EquisMetaStock Group] Re: Dynamic Breakout system - How to speed it up?

 




Lionel,

It should be a period.

Just a reminder ... there are two forum DLL's.

Both are in the files section. The difference was when they were published and content.

Here is the HHV function from each:

from forum
ExtFml( "Forum.HHV", Data Array, Variable Period)

from ForumDLL
ExtFml( "ForumDLL.VarHHV", Data Array, Variable Period)

If you are having problems it could be in the spacing within the quotes. Notice above that the call is "ForumDLL.VarHHV" ...no space

In your message I see "ForumDLL. VarHHV" ...space after period
or
LNC:=Ref(ExtFml("ForumDll. VarHHV",H,Fml("DBS-LookBack"))-1);

The internet is not friendly to this type of formula and has been known to cause the spacing problem.

Preston


--- In equismetastock@xxxxxxxxxxxxxxx, "Lionel Issen" <lissen@xxx> wrote:
>
> Preston:
>
>
>
> This formula is on the 8th line of text that starts with-
>
>
>
> Walter
>
> ..snip..
>
>
>
> Because this message seems to be an image rather than text, I am unable to
> copy and paste. I have copied the text. Any eror is mine.
>
>
>
> LNC:=Ref(ExtFml("ForumDll. VarHHV",H,Fml("DBS-LookBack"))-1);
>
> In "ForumDLL.VarHHV" is the period correct or should it be a comma?
>
>
>
> Thanks
>
>
>
> Lionel
>
>
>
> From: equismetastock@xxxxxxxxxxxxxxx [mailto:equismetastock@xxxxxxxxxxxxxxx]
> On Behalf Of pumrysh
> Sent: Tuesday, November 06, 2007 5:21 PM
> To: equismetastock@xxxxxxxxxxxxxxx
> Subject: [SPAM][EquisMetaStock Group] Re: Dynamic Breakout system - How to
> speed it up?
>
>
>
> Paul,
>
> I believe we can indeed give you some answers.
>
> A little history behind the indicator. Originally it was part of
> some work done by Thomas Stridsman for Futures Magazine...I believe
> that was in 1998. It 2004 it appeared in Traders Mag. Here is a
> summary:
> "Dynamic Breakout System" (Trading System Lab, Feb. 2003)
> Author: Thomas Stridsman
> Summary: This system enters a long (short) trade if the last closing
> price is above (below) the highest high (lowest low) of the lookback
> period. The lookback period changes based on market volatility.
>
> The Tradestation folks have written a very good discussion(PDF) on
> the indicator which I will upload into our files section for you.
>
> Years ago, before this forum and many others were around the folks
> at Equis hosted a forum that I was simply known as Metastock. A
> fellow by the name of Walter Lake introduced Stridsman's work to the
> group back in '98. There was also a bit of discussion about the use
> of +prev-prev. Turns out that it is the key to making the
> indicator "dynamic" or what we call variable in today's terminology.
> Luckily we can still go back and review some of those earlier posts
> and the site listed below will get you there.
>
> http://www.purebytes.com/cgi-local/swish/swish-cgi.pl
>
> Search for DBS
>
> Metastock
>
> 1998
>
> This will pull up all the old discussions about the system.
>
> Also
>
> http://www.purebytes.com/archives/metastock/1998/msg06413.html
>
> From Walter:
> -----snip-------
> The "+Prev-Prev" comments in the article should be researched when
> using "DBS Lookback" in other Metastock indicators.
>
> Here's one writer's experience ... "I tested both versions on several
> indices and found them to be different too:
> This +PREV-PREV causes a shift to the left of the indicator, a trick
> to center an indicator?"
>
> "after some testing, I found that without +PREV-PREV LastValue will
> deliver a constant value (the last value for LookBack in Your chart).
>
> So in writing Tema(C,LastValue(Fml("LookBack"))) You get a TEMA with
> a constant period, as required by Metastock.
>
> By using Tema(C,LastValue(Fml("LookBack")+PREV-PREV))
> You get what You want, a TEMA with a variable period. Nice trick!"
>
> Walter
> ----snip-----
>
> Realize that back then we didn't have DLL's so our only recourse was
> to get a little creative with indicators. Today we have DLL's and it
> is for just such a purpose that they should be used.
>
> The answer then to removing the prevs is to use a DLL.
>
> Lnc:=Ref(HHV(H,LastValue(Fml("DBS-LookBack")+PREV-PREV)),-1);
>
> using the equis forum DLL available in our files, EquisForum, or
> Traders Consortium the formula would then become:
>
> LNC:=Ref(ExtFml("ForumDLL.VarHHV",H,Fml("DBS-LookBack")),-1);
>
> You will notice that LastValue is no longer used as well.
>
> That takes care of the majority of prev statements and should speed
> up your work quite a bit. If you would like I will continue to look
> at DBS-Lookback indicator and see if that prev can be removed as
> well if you like.
>
> After reading the Tradestation PDF entitled Dynamic Breakout II
> Strategy I think you will find that this system certainly has some
> merit although it does need some work.
>
> Glad we could help,
>
> Preston
>
> --- In equismetastock@xxxxxxxxxxxxxxx
> <mailto:equismetastock%40yahoogroups.com> , ppappppapp <no_reply@>
> wrote:
> >
> > Greetings all,
> >
> > A 'little bird' suggested that I should post my querry here and
> > hopefully someone might offer some advice.
> >
> > O.k. here goes;
> >
> > The following indicators are based on the Dynamic Breakout system
> > (DBS) as found in Thomas Stridsman's book "Trading systems that
> work"
> >
> > It's simply a variation on the Turtle channel breakout method
> where
> > you buy a breakout above the highest high of `x' number of days
> ago.
> > (i.e. a HHV channel)
> > This DBS system varies the channel width dynamically according to
> > price volatility (as measured by standard deviation)
> >
> > The following indicator finds the VALUE of the varying channel
> width
> > (in this case the HHV channel will vary between 20 and 100 bars
> ago)
> > and is then referenced into the second indicator
> >
> > ******************************
> >
> > {DBS-Lookback}
> >
> > {-----User Inputs-----}
> >
> > VolPer:=Input("Enter StdDev periods",1,100,30);
> > LBmin:=Input("Enter Min. lookback periods for entry",5,100,20);
> > LBmax:=Input("Enter Max. lookback periods for entry",20,200,100);
> >
> >
> > HV:= Stdev(C, VolPer);
> > YestHV := Ref(HV, -1);
> > DeltaHV := 1+((HV-YestHV)/HV);
> > If(Cum(1)=1,LBmin,Min(Max(PREV*DeltaHV,LBmin),LBmax));
> >
> > ********************************
> >
> > This following second indicator then references the above first
> > indicator to plot entry and exit signals
> > (i.e. not `clean' signals but ALL valid signals where they occur)
> >
> > ********************************
> >
> > {DBS-Lsigs}
> >
> > {Dynamic Breakout system - Long signals}
> >
> > { User inputs }
> > Mess1:=Input("Change defaults in DBS-Lookback Indicator",0,0,0);
> >
> > {Long entry & Long exit Channel}
> > Lnc:=Ref(HHV(H,LastValue(Fml("DBS-LookBack")+PREV-PREV)),-1);
> >
> > Lxc:=Ref(LLV(L,LastValue(Fml("DBS-LookBack")+PREV-PREV)),-1);
> >
> > { Entry/Exit Long breakouts }
> > entry:=H>Lnc;
> > exit:= L<Lxc;
> >
> > entry;
> > -exit
> >
> > *******************************
> >
> > o.k., now for the question;
> >
> > You will note from the above, the use of one(1) PREV command in
> the
> > first indicator and four(4) PREV commands in the second indicator
> (as
> > well as the PREV command associated with the referenced formula
> > within this indicator)
> >
> > Although the indicators work fine and dandy, they take a long,
> Long,
> > L---O---N---G time to plot on screen. Obviously due to the large
> > amount of computer resource demanded by the PREV command.
> > If I attempt to run an exploration on numerous stocks/futures
> using
> > these indicators, I generally have to do it at night just before
> bed.
> > The results are available for me in the morning. (lucky I sleep
> for
> > 8+ hours)
> >
> > Is there anything I can do to the indicator code to speed up the
> > execution?
> > Or is this simply a Metastock limitation that I will have to live
> > with?
> > In short how can i replace the PREV commands?
> >
> > Any tips would be much appreciated.
> >
> >
> > Thanks kindly,
> >
> > Paul
> >
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

JPEG image

JPEG image