[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EquisMetaStock Group] Re: Q&B indicator Warning Wrong Code!!!!!



PureBytes Links

Trading Reference Links



For what it's worth, I subscribed to the newsletter, obtained the 
code for the B and Q indictors and back tested them over the past 
five years with ETF's. The results were outstanding. If the future is 
anything like the past, their value will be priceless.

Joe




--- In equismetastock@xxxxxxxxxxxxxxx, superfragalist <no_reply@xxxx> 
wrote:
> 
> 
> This is the wrong code for the B&Q indicators. I would not attempt 
to 
> trade with this code. It will give you bad indications. 
> 
> The code in the newsletter has been verified by several people, 
> tested and re-tested for accuracy. This code has not been tested 
and 
> does not give good results. $99 is less than the commission on a 
few 
> trades, and a whole lot less than the losses from one bad trade. 
> Rather than trying to find a way to get everything for free, just 
buy 
> the newsletter and save yourself a ton of grief. 
> 
> At least you'll learn how to code, find some interesting indicators 
> that are actually effective, learn how to do explorations the right 
> way, work the systems tester and a lot of other stuff you need to 
> know. 
> 
> How expensive is the "free" learning curve anyway. 
> 
> 
> 
> 
> 
> 
> --- In equismetastock@xxxxxxxxxxxxxxx, "Hani" <elmagd2000@xxxx> 
wrote:
> > Alberto and Roy,
> > I have contacted Equis regarding this issue and they sent me the 
> corrected
> > ones plus promised to amend web page. Here they are:
> > 
> > B Indicator:
> > --------------------------
> > m:=Input("% Scalar trend period",1,25,4);
> > n:=Input("% Scalar noise period",1,500,250);
> > cf:=Input("% Scalar correction factor",1,250,2);
> > p1:=Input("First moving average periods",1,200,7);
> > p2:=Input("Second moving average periods",1,200,15);
> > rev:=Mov(C,p1,E)-Mov(C,p2,E);
> > pds:=If(rev>0,1,-1);
> > dc:=ROC(C,1,$);
> > cpc:=If(pds<>Ref(pds,-1),0,(dc*pds)+PREV);
> > trend:=If(pds<>Ref(pds,-1),0,(cpc*(1/m))+(PREV*(1-(1/m))));
> > dt:=cpc-trend;
> > noise:=cf*Sqrt(Mov(dt*dt,n,S));
> > temp:=If(Abs(trend)+Abs(noise)=0,1,Abs(trend)+Abs(noise));
> > (Abs(trend)/temp)*100;
> > ------------------------------
> > Q Indicator
> > ------------------------------
> > m:=Input("% Scalar trend period",1,25,4);
> > n:=Input("% Scalar noise period",1,500,250);
> > cf:=Input("% Scalar correction factor",1,250,2);
> > p1:=Input("First moving average periods",1,200,7);
> > p2:=Input("Second moving average periods",1,200,15);
> > rev:=Mov(C,p1,E)-Mov(C,p2,E);
> > pds:=If(rev>0,1,-1);
> > dc:=ROC(C,1,$);
> > cpc:=If(pds<>Ref(pds,-1),0,(dc*pds)+PREV);
> > trend:=If(pds<>Ref(pds,-1),0,(cpc*(1/m))+(PREV*(1-(1/m))));
> > dt:=cpc-trend;
> > noise:=cf*Sqrt(Mov(dt*dt,n,S));
> > trend/noise
> > --------------------------------
> > 
> > Hoping to be of use.
> > Hani
> > 
> > 
> > ----- Original Message -----
> > From: "Roy Larsen" <rlarsen@xxxx>
> > To: <equismetastock@xxxxxxxxxxxxxxx>
> > Sent: Wednesday, November 24, 2004 1:39 PM
> > Subject: Re: [EquisMetaStock Group] Q&B indicator
> > 
> > 
> > >
> > > Hi Alberto
> > >
> > >
> > > The Q and B indicators are public domain but have errors as 
> published
> > > on the Equis website.
> > >
> > > http://www.equis.com/Support/TASCArticles/ViewArticle.aspx?Id=61
> > >
> > >
> > > Kind regards
> > >
> > > Roy Larsen
> > > www.metastocktips.co.nz
> > > Free formulas and MS links
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "alberto_sfolcini" <no_reply@xxxxxxxxxxxxxxx>
> > > To: <equismetastock@xxxxxxxxxxxxxxx>
> > > Sent: Wednesday, November 24, 2004 10:54 PM
> > > Subject: [EquisMetaStock Group] Q&B indicator
> > >
> > >
> > > >
> > > >
> > > >
> > > > Hi there,
> > > >
> > > > I saw some samples in file section and read some message 
about 
> them,
> > > > but I cant understood if the code for Q&B indicator is public.
> > > > If is it public could explain where I can found it?
> > > > I'll check public and free version of November Tip&Tricks but 
I 
> did
> > > > not find it, maybe I had some mistakes :-)
> > > > Or, if it is not public, how it works, which are the basis ?
> > > >
> > > > :)
> > > > Thank you so much,
> > > > Alberto
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >








------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/BefplB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/equismetastock/

<*> To unsubscribe from this group, send an email to:
    equismetastock-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/