[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EquisMetaStock Group] Re: "ICE" issue in getting more than one OPT to run.



PureBytes Links

Trading Reference Links

Martin,

thanks for your responce.  

Yes, the manual indicates its for 8.0 which is what I have.  

Hard drive space is no issue, I've got a fairly new system, fast and
lots of space.  

The "repair" function on the intall program also did not help.

I did a download again.  Deleted the old install.  Reinstalled.  Still
does not preform more than a single optimization.  Not the 100 or so
that is should run and indicates when I start the optimization run
that it will do.  It clearly doesn't run long enough to do the 100
optimizations so something is killing it after one run, I suspect.

I've sent an email to Adaptick, Inc asking if they have any ideas.  I
suspect that there is an option toggled incorrectly at this point. 
But to be honest, I don't know what to think.


--- In equismetastock@xxxxxxxxxxxxxxx, "praktikus_ms" <praktikus@xxxx>
wrote:
> Hello metastockuser
> 
> there are two thoughts comming up in  my mind:
> 
> 1) have you choosen the right version (7.xx or 8.xx) when you 
> installed it (I dont know if you get much useful if you set it wrong 
> but that happened to me once with a different piece of software)?
> 
> 2) do you have enough space on your HDD to perform the test?
> 
> Regards,
> 
> Martin
> 
> 
> --- In equismetastock@xxxxxxxxxxxxxxx, "metastockuser" 
> <metastockuser@xxxx> wrote:
> > Ok folks.  I see that the ICE program looks as if he can help me.  
> Not
> > being math or programming competent, this make help bridge the gap.
> > 
> > I'm having a problem with ICE that I'm now trying to resolve. 
> > 
> > When I run an Ice simulation that uses the OPT feature.  It only 
> runs
> > one opt then stops.  The "view simulation" option is displayed, and 
> I
> > can view the single simulation which ran.
> > 
> > I am able to run any number of optimzations against my own 
> simulations
> > with no problem.
> > 
> > When the Ice Opt Simulation begins, I can clearly see that it
> > scheduled to run say 95 or whatever opt runs.  But in fact, it looks
> > as if only one runs and then only one displays.  The optimization
> > happens very rapidly so it is apparent that only one will run.
> > 
> > I'm thinking that I either have a bad installation and need to
> > reinstall (I downloaded off the net, my cd has not yet arrived), OR,
> > there is a simple option somewhere that is not toggled correctly.
> > 
> > I'll keep poking around.  If any of you have experienced this before
> > or know off the top of your head WHY it's happening I'd appreciate 
> the
> > assistance.
> > 
> > Also, thanks to the guy whoes lips apparently do not move when he
> > reads for mentioning ICE.


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/BefplB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
equismetastock-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/