--- In
amibroker@xxxxxxxxxxxxxxx, "Bruce" <brucer@xxx> wrote:
>
> I'm buried in some end of the year paperwork right now, but let me offer a couple of quick comments.
>
> 1. The dropdown list of names is in the expanded version that I plan to put in the subscriber area along with some other functions related to portfolio mixes, such as percentage allocations, re-balance intervals, etc. My long-term intent is really to offer "starter" examples in the FREE CODE area that users can expand on. We want to concentrate on breadth of topics there.
>
> 2. One simple tip that might help deal with WL numbers in many places is to name your watchlist to their number plus that name. That will make the numbers easier to find in a long list of names in the watchlist tree. For example, my watchlist 13 is named "13 - Select".
>
> 3. Lastly, the ATC should be going into Group 253 since atcFlagDefaults was used in the ATC call in the example that I posted. I may have misread your note, but it seemed to say that you believe are seeing it in the watchlist. As far as what the ATC is named, you can use the name instead of the number by changing the AddtoComposite statement to the following -
>
> AddToComposite( Lavg, "~ListAvg_" + CategoryGetName( categoryWatchlist, wlnum ),
> "X", atcFlagDefaults + atcFlagEnableInIndicator );
>
>
> -- BruceR
>
>
> --- In
amibroker@xxxxxxxxxxxxxxx, furinkazaan <furinkazaan@> wrote:
> >
> > Bruce, I notice that the parameters use a WLNUMfor a watch list number.
> > Since I intend to run this on many sectoral watchlists, I wonder if we can
> > show the 'Watchlist Name' instead of/ in addition to WL NUM? Can the
> > Parameters dialog be coded to offer a drop-down list of all watchlists to
> > the current market? Can the LAVG be defined to show "~ListAVg" + Watchlist
> > Name?
> >
> > while its fantastic that each atc is written ijnto the watchlist folder for
> > which it is computed, if I got them all into 1 group to check, say relative
> > performance, then I'd have trouble identifying eact atc by just the WL Num.
> >
> > can you help? Best wishes for a great year ahead!
> >
> >
> > 2009/12/11 furinkazaan <furinkazaan@>
> >
> > > Thanks very much Bruce. I intend to set this up over the weekend. I'll
> > > report progress.
> > >
> > > 2009/12/9 Rick Osborn <ricko@>
> > >
> > >
> > >>
> > >>
> > >>
> > >> changed the AA range and ran a dummy scan. That did the trick
> > >> Thanks
> > >>
> > >>
> > >> ------------------------------
> > >> *From:* Bruce <brucer@>
> > >> *To:*
amibroker@xxxxxxxxxxxxxxx
> > >> *Sent:* Tue, December 8, 2009 8:16:46 PM
> > >>
> > >> *Subject:* [amibroker] Re: AmibrokerU Update
> > >>
> > >>
> > >>
> > >> Rick -
> > >>
> > >>
> > >> Not much info, so I can't be sure. A SWAG would be to check the From/To
> > >> range in the AA window. As I noted in the original article, I used the
> > >> existing AA user interface as an easy way to control the range. If that is
> > >> it, you can change the AA range and run a dummy scan to "set it". Or, you
> > >> might want to look at the ListAvg AFL code for a comment that notes that a
> > >> variable called "bir" can be set to 1 to use all bars by default.
> > >>
> > >> -- Bruce
> > >>
> > >> --- In amibroker@xxxxxxxxx
ps.com <amibroker%
40yahoogroups.com>, Rick
> > >> Osborn <ricko@> wrote:
> > >> >
> > >> > Bruce
> > >> > All the values in all the watchlists are 1000.
> > >> > What am I doing wrong?
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > ____________ _________ _________ __
> > >> > From: Bruce <brucer@>
> > >> > To: amibroker@xxxxxxxxx
ps.com <amibroker%
40yahoogroups.com>
> > >>
> > >> > Sent: Tue, December 8, 2009 2:28:20 PM
> > >> > Subject: [amibroker] Re: AmibrokerU Update
> > >> >
> > >> >
> > >> > Sure, I'll give a (hopefully) useful example. And, I'll try to do more
> > >> > of this, where possible, in the future. In order to facilitate this,
> > >> > though, it is best to use a Chart Template, Complete file and record a
> > >> > generic procedure for how to use it. Rather than introduce that now,
> > >> > I'll walk you through a manual install.
> > >> >
> > >> > So, download the ListAvg.afl file to your include directory. If you
> > >> > have done a stock install, it will be at C:\Program
> > >> > Files\Amibroker\ Formulas\ Include. You can verify this by selecting the
> > >> > Tools / Preferences menu and then the AFL tab. The standard include
> > >> > path will be the first Pick button.
> > >> >
> > >> > Now, take the following code and either save it in your Custom formulas
> > >> > directory, or enter it into the code editor. The editor can be launched
> > >> > from the Analysis / Formula Editor menu.
> > >> >
> > >> > Once it is copied into the editor, you can use the Tools / Insert Chart
> > >> > menu to get a chart.
> > >> >
> > >> > This indicator uses parameters to select a watchlist to perform the
> > >> > ListAvg on. Right click on the chart and select parameters.. You will
> > >> > need to enter a watchlist number. When ready, click the Calculate
> > >> > parameter button to perform the calculation. Since this can be lengthy,
> > >> > it is only done on user action. But, it is written to an AddtoComposite
> > >> > ticker ("~ListAvg" + number) for each watchlist, and simply read
> > >> > thereafter.
> > >> >
> > >> > #include <ListAvg.afl>
> > >> > wlnum = Param( "Watchlist", 13, 1, 100, 1 );
> > >> > trig = ParamTrigger( "Calculate", "CLICK" );
> > >> > Lavg = Nz( Foreign( "~ListAvg" + wlnum , "C" ) );
> > >> > if ( trig )
> > >> > {
> > >> > Lavg = ListAvg( CategoryGetSymbols( categoryWatchlist, wlnum
> > >> > ) );
> > >> > AddToComposite( Lavg, "~ListAvg" + wlnum, "X",
> > >> > atcFlagDefaults + atcFlagEnableInIndi cator );
> > >> > }
> > >> > Plot( Lavg, "Watchlist " + wlnum + " ListAvg", colorDefault );
> > >> >
> > >> > Lastly, since you mentioned sector averages - I'll mention one example
> > >> > use from my experience. Technology averages do not typically indicate
> > >> > the health of innovative small-cap tech stocks. The averages are driven
> > >> > by Intel, Microsoft, etc. An average of targeted, innovative small-cap
> > >> > tech companies in a watchlist can be more useful for stock investing.
> > >> >
> > >> > Hope that helps.
> > >> > -- Bruce
> > >> >
> > >> > --- In amibroker@xxxxxxxxx
ps.com, furinkazaan <furinkazaan@ ...>
> > >> wrote:
> > >> > >
> > >> > > Bruce, thanks for the afl. It comes at the most oppurtune time when
> > >> > I'm
> > >> > > considering creation of many sectoral indices. However, rookie that I
> > >> > am, I
> > >> > > am not able to figure out how to use the AFL. I would appreciate a
> > >> > > step-by-step detail on how to use it, including where to copy the afl,
> > >> > where
> > >> > > to store the csv list of tickers etc., and how to run it.. Can the afl
> > >> > be
> > >> > > pointed to a watchlist instead of a csv file of tickers?
> > >> > >
> > >> > > Thanks again.
> > >> > >
> > >> > >
> > >> > > 2009/11/18 Bruce brucer@
> > >> > >
> > >> > > >
> > >> > > >
> > >> > > > Quick update - I've added a Free Code module and Free Code article
> > >> > to
> > >> > > > AmibrokerU called ListAvg. For those who need for an equal weighted
> > >> > > > average of a list of tickers, the Code module provides a function
> > >> > that
> > >> > > > implements the result in a single call. If you are interested in the
> > >> > > > background on the need for this function, and the problem with other
> > >> > > > types of index and list averages, the article should be of interest.
> > >> > > > Here are the links (sorry they are long, I'll fix that soon) -
> > >> > > >
> > >> > > >
> > >> >
http://www.amibroke ru.com/FreeLibra ry/FreeCode/ tabid/99/
> > >> articleType/ Arti\
> > >> > \
> > >> > > >
> > >> > cleView/articleId/ 109/ListAvg- ndash-A-Function -to-Calculate-
> > >> an-Equal- Wei\
> > >> > \
> > >> > > >
> > >> > ghted-Average- of-a-List- of-Tickers. aspx<
http://www.amibroke> > >>
ru.com/FreeLi\
> > >> > brary/FreeCode/ tabid/99/ articleType/ ArticleView/ articleId/
> > >> 109/ListAvg- nd\
> > >> > ash-A-Function- to-Calculate- an-Equal- Weighted- Average-of- a-List-of-
> > >> Ticke\
> > >> > rs..aspx>
> > >> > > >
> > >> > > >
> > >> >
http://www.amibroke ru.com/FreeLibra ry/FreeArticles/ tabid/63/
> > >> articleType/ \
> > >> > \
> > >> > > >
> > >> > ArticleView/ articleId/ 110/ListAvg- ndash-Uses- and-Example.. aspx<
> > >>
http://www\
> > >> <
http://www>> .amibrokeru. com/FreeLibrary/ FreeArticles/ tabid/63/
> > >> articleType/ ArticleVie\
> > >> > w/articleId/ 110/ListAvg- ndash-Uses- and-Example. aspx>
> > >> > > >
> > >> > > > As we prepare to open up subscriptions to AmibrokerU soon, I've
> > >> > received
> > >> > > > some questions about what types of free and subscription content
> > >> > that we
> > >> > > > plan to add. In general, we will offer "lite" of "subset" versions
> > >> > of
> > >> > > > premium code and articles available in the subscription sections.
> > >> > > > ListAvg is an example of that. It implements an equal weighted
> > >> > average
> > >> > > > of a CSV list, and is effectively re-balanced daily. Plans call for
> > >> > a
> > >> > > > full-featured routine in the subscription section called WtMixRebal
> > >> > that
> > >> > > > implements weighed averages that can be re-balanced at different
> > >> > periods
> > >> > > > or based upon a signal. This module is useful for index averages as
> > >> > > > well as portfolio modeling of a weighted list of tickers with
> > >> > shorting
> > >> > > > and margin with a fast, single function call.
> > >> > > >
> > >> > > > In addition to educational articles, I'm going to try to cover
> > >> > broader
> > >> > > > topics of applications, with examples, that I've found useful. In
> > >> > that
> > >> > > > spirit, the next topic will be about connecting to Excel and
> > >> > > > manipulating spreadsheets, charts, and data. That may seem a little
> > >> > > > odd, but there are many uses for such an interface - both for input
> > >> > to
> > >> > > > and output from Amibroker. For example - summary bar charts, command
> > >> > > > button trading control, etc. More later ....
> > >> > > >
> > >> > > > -- BruceR
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > >
> > >> >
> > >>
> > >>
> > >>
> > >
> > >
> >
>