[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EquisMetaStock Group] Re: Plot Daily / Weekly Indicator signal line (Simple Moving Average) in LowerTimeFr



PureBytes Links

Trading Reference Links

Thanks Preston for Replay

This formula calculate daily sma of close on lower time frame And
in same way of daily sma formula I try to write code for indicator 
simple moving average in following way

R; {MACD}
Z:=Cum((J>0)* R);
(Z-ValueWhen(N+1,J>0,Z))/N;{Signal Line} 

but not getting desire result

Harish Chheda


--- In equismetastock@xxxxxxxxxxxxxxx, pumrysh <no_reply@xxx> wrote:
>
> Just use the SMA from the site.
> 
> http://www.metastocktips.co.nz/daily_sma.txt
> 
> 
> Hope this helps,
> 
> Preston
> 
> 
> 
> 
> --- In equismetastock@xxxxxxxxxxxxxxx, "hkchheda" 
> <hkchhedabackup@> wrote:
> >
> > Hi All ;
> > 
> > I am using Daily /Weekly Macd formula from 
> > http://www.metastocktips.co.nz/ site by respected Roy Larsen . In 
> > above formula by Roy Larsen signal line is exponential moving 
> > average. I want to replace exponential moving average by simple 
> > moving average as signal line in this indicator in lower time 
> frame .
> > 
> > Can someone help me ?
> > 
> > Formula on site for Macd with EMA as Signal Line :
> > 
> > {Daily MACD} 
> >  {This indicator uses the Equis Forum DLL}
> >  {Roy Larsen, 2004-2007}
> > 
> >  {User settings}
> > N:=Input("Daily MACD, Signal Periods",1,19,9);
> > Q:=Input("Mode, 0=Static 1=Dynamic 2=Delayed",0,2,1);
> >  {0, update at last bar of current frame}
> >  {1, update on each new bar}
> >  {2, update on first bar of new frame}
> > 
> >  {Daily frame timing}
> >  {* Day counter from metastock@}
> > M:=Month();A:=Int((14-M)/12);D:=DayOfMonth();
> > Y:=Year()+4800-A;B:=M+(12*A)-3;
> > M:=D+Int((2+153*B)/5)+(365*Y)+Int(Y/4)-Int(Y/100)+Int(Y/400)-
32045;
> >  {*}
> > I:=M-ValueWhen(2,1,M); 
> > B:=I=1 AND Max(Hour(),Minute())=0;
> > G:=LastValue(Highest(Sum(I>0,5))=5);
> > I:=I AND B=0 OR ValueWhen(2,1,B); M:=G+I;
> > F:=G+(M=0)*ExtFml("Forum.Sum",Ref(I,1),1);
> > A:=LastValue(Cum(1)-1)=Cum(1);
> > B:=Alert(A,2)*(A=0);
> > J:=If(F,1,If(Alert(F,2)=0 AND M,2,0));
> > J:=If(A+LastValue(J)>2 OR B+(Q=1)=2,1,J);
> > J:=If(G,1,If(Q=2 OR Cum(J)<=1,M*2,J));
> > 
> >  {Daily CLOSE}
> > K:=ValueWhen(1,J,If(J=1,C,ValueWhen(2-G,1,C)));
> > 
> >  {Calculate and plot Daily MACD}
> > X:=0.15; Y:=0.075; N:=2/(N+1);
> > X:=If(Cum(J>0)=1,K,PREV*If(J,1-X,1)+If(J,K*X,0));
> > {X:=If(Cum(J>0)=1,K,ValueWhen(1,J,PREV)*(1-X)+K*X);}
> > Y:=If(Cum(J>0)=1,K,PREV*If(J,1-Y,1)+If(J,K*Y,0));
> > {Y:=If(Cum(J>0)=1,K,ValueWhen(1,J,PREV)*(1-Y)+K*Y);}
> > R:=X-Y;
> > Z:=If(Cum(J>0)=1,R, PREV*If(J,1-N,1)+If(J,R*N,0));
> > {Z:=If(Cum(J>0)=1,R,ValueWhen(1,J,PREV)*(1-N)+R*N);}
> > R; {MACD}
> > Z; {Signal}
> > 
> > I am trying to convert EMA Signal Line to SMA Signal Line as 
> follow :
> > 
> > {Daily MACD} 
> >  {This indicator uses the Equis Forum DLL}
> >  {Roy Larsen, 2004-2007}
> > 
> >  {User settings}
> > N:=Input("Daily MACD, Signal Periods",1,19,9);
> > Q:=Input("Mode, 0=Static 1=Dynamic 2=Delayed",0,2,1);
> >  {0, update at last bar of current frame}
> >  {1, update on each new bar}
> >  {2, update on first bar of new frame}
> > 
> >  {Daily frame timing}
> >  {* Day counter from metastock@}
> > M:=Month();A:=Int((14-M)/12);D:=DayOfMonth();
> > Y:=Year()+4800-A;B:=M+(12*A)-3;
> > M:=D+Int((2+153*B)/5)+(365*Y)+Int(Y/4)-Int(Y/100)+Int(Y/400)-
32045;
> >  {*}
> > I:=M-ValueWhen(2,1,M); 
> > B:=I=1 AND Max(Hour(),Minute())=0;
> > G:=LastValue(Highest(Sum(I>0,5))=5);
> > I:=I AND B=0 OR ValueWhen(2,1,B); M:=G+I;
> > F:=G+(M=0)*ExtFml("Forum.Sum",Ref(I,1),1);
> > A:=LastValue(Cum(1)-1)=Cum(1);
> > B:=Alert(A,2)*(A=0);
> > J:=If(F,1,If(Alert(F,2)=0 AND M,2,0));
> > J:=If(A+LastValue(J)>2 OR B+(Q=1)=2,1,J);
> > J:=If(G,1,If(Q=2 OR Cum(J)<=1,M*2,J));
> > 
> >  {Daily CLOSE}
> > K:=ValueWhen(1,J,If(J=1,C,ValueWhen(2-G,1,C)));
> > 
> >  {Calculate and plot Daily MACD}
> > X:=0.15; Y:=0.075; N:=2/(N+1);
> > X:=If(Cum(J>0)=1,K,PREV*If(J,1-X,1)+If(J,K*X,0));
> > {X:=If(Cum(J>0)=1,K,ValueWhen(1,J,PREV)*(1-X)+K*X);}
> > Y:=If(Cum(J>0)=1,K,PREV*If(J,1-Y,1)+If(J,K*Y,0));
> > {Y:=If(Cum(J>0)=1,K,ValueWhen(1,J,PREV)*(1-Y)+K*Y);}
> > R:=X-Y;
> > Z:=Cum((J>0)* R);
> > R; {MACD}
> > (Z-ValueWhen(N+1,J>0,Z))/N;{Signal}
> > 
> > But I am getting horizontal line value zero for Signal Line . I 
am 
> > not getting what I am doing wrong .
> > 
> > Can someone help me to solve the problem in formula .
> > 
> > Thanks
> > 
> > Harish Chheda
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/equismetastock/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/equismetastock/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:equismetastock-digest@xxxxxxxxxxxxxxx 
    mailto:equismetastock-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    equismetastock-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/