[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[amibroker] Re: Writing a fib cluster indicator


  • Date: Thu, 24 Dec 2009 19:53:57 -0000
  • From: "kevinoversby" <kevinoversby@xxxxxxxxx>
  • Subject: [amibroker] Re: Writing a fib cluster indicator

PureBytes Links

Trading Reference Links

Its using highestvisiblevalue which needs 5.25 minimum.

--- In amibroker@xxxxxxxxxxxxxxx, Asis Ghosh <subhamedicalsjpg@xxx> wrote:
>
> In AB-4.8--its showing ERROR-30: Syntax Error probably in the last para 
> of this AFL--what to do ?
> 
> Asis
> 
> 
> reinsley wrote:
> > Carolyn's video looks like some AdvancedGet features...
> >
> > The following code may help you. The space between the red and blue line 
> > is the Brach zone.
> >
> > Best regards
> >
> >
> > _SECTION_BEGIN( "Fibonacci" );
> > Offset = 5; //use two sheets: one with 5 and another with 7, or maybe 
> > other offset value
> > Avgmov = Offset * MA( abs( ROC( C, 1 ) ), 20 );
> > //per = LastValue( Avgmov );//original value
> > per = Param( "Pivot %", 0.3, 0.05, 6, 0.05 );
> > x = Cum( 1 );
> > Range = 0.01;
> > PS = TroughBars( L, per, 1 ) == 0;
> > xa = LastValue( ValueWhen( PS, x, 1 ) );//x from last trough
> > Ya = LastValue( ValueWhen( PS, L, 1 ) );//y (Low) last trough
> > PR = PeakBars( H, per, 1 ) == 0;
> > xb = LastValue( ValueWhen( PR, x, 1 ) );//x from last peak
> > Yb = LastValue( ValueWhen( PR, H, 1 ) );//y (High) last peak
> > Trough_ReTest = abs( ( L / ya ) - 1 ) < Range;
> > Peak_ReTest = abs( ( H / yb ) - 1 ) < Range;
> > Trough_Cross = Cross( ya, C );
> > Peak_Cross = Cross( C, yb );
> >
> > //UP = upSwing DN = downSwing
> > UP = xb > xa;
> > //upSwing
> > DN = xa > xb;
> > //DownSwing
> >
> >
> > RT23_6 = IIf( UP, yb - ( yb - ya ) * 0.236, IIf( DN, ya + ( yb - ya ) * 
> > 0.236, -1e10 ) );
> >
> > RT38_2 = IIf( UP, yb - ( yb - ya ) * 0.382, IIf( DN, ya + ( yb - ya ) * 
> > 0.382, -1e10 ) );
> >
> > RT50_0 = IIf( UP, yb - ( yb - ya ) * 0.500, IIf( DN, ya + ( yb - ya ) * 
> > 0.500, -1e10 ) );
> >
> > RT61_8 = IIf( UP, yb - ( yb - ya ) * 0.618, IIf( DN, ya + ( yb - ya ) * 
> > 0.618, -1e10 ) );
> >
> > RT78_6 = IIf( UP, yb - ( yb - ya ) * 0.786, IIf( DN, ya + ( yb - ya ) * 
> > 0.786, -1e10 ) );
> >
> > RT127_2 = IIf( UP, yb - ( yb - ya ) * 1.272, IIf( DN, ya + ( yb - ya ) * 
> > 1.272, -1e10 ) );
> >
> > RT161_8 = IIf( UP, yb - ( yb - ya ) * 1.618, IIf( DN, ya + ( yb - ya ) * 
> > 1.618, -1e10 ) );
> >
> > //RT261_8 = IIf( UP, yb - ( yb - ya ) * 2.618, IIf( DN, ya + ( yb - ya ) 
> > * 2.618, -1e10 ) );
> >
> > RT = IIf( UP, -100 * ( yb - L ) / ( yb - ya ), 100 * ( H - ya ) / ( yb - 
> > ya ) );//Retracement_Value
> >
> > InZone = C<yb & C>ya;
> >
> > Plot( IIf( x > xa, ya, -1e10 ), "", colorBrown, 1 + 8 );//"Bottom"
> > Plot( IIf( x > xb, yb, -1e10 ), "", colorBrown, 1 + 8 );//"Top"
> >
> > xab = IIf( xb > xa, xb, xa );
> >
> > //Retracements
> >
> > Plot( IIf( x >= xab + 1, RT23_6, -1e10 ), "", colorWhite, 1 );//"23,6% 
> > Retr."
> >
> > Plot( IIf( x >= xab + 1, RT38_2, -1e10 ), "", colorGreen, 1 );//"38,2% 
> > Retr."
> >
> > Plot( IIf( x >= xab + 1, RT50_0, -1e10 ), "", colorYellow, 1 );//"50,0% 
> > Retr."
> >
> > Plot( IIf( x >= xab + 1, RT61_8, -1e10 ), "", colorRed, 1 + 8 );//"61,8% 
> > Retr."
> >
> > Plot( IIf( x >= xab + 1, RT78_6, -1e10 ), "", colorBlue, 1 + 8 
> > );//"78,6% Retr."
> >
> > Plot( IIf( x >= xab + 1, RT127_2, -1e10 ), "", colorSkyblue, 1 
> > );//"127,2% Retr."
> >
> > Plot( IIf( x >= xab + 1, RT161_8, -1e10 ), "", colorLavender, 1 
> > );//"161,8% Retr."
> >
> > //Plot( IIf( x >= xab + 1, RT261_8, -1e10 ), "", colorDarkGreen, 1 
> > );//"261,8% Retr."
> >
> > //_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} \nOpen %g 
> > \nHigh %g \nLow %g \nClose %g (%.1f%%) {{VALUES}}\n", O, H, L, C, 
> > SelectedValue( ROC( C, 1 ) ))
> > //"per Fib = " + WriteVal(per, 1.1 ) + " \nCurrent Correction = " + 
> > WriteVal( RT, 1.0 ) + "%");
> >
> > _SECTION_END();
> >
> > _SECTION_BEGIN( "PrevSwing" );
> > // previous swing resistance support
> > Offsetps = 5; //use two sheets: one with 5 and another with 7, or maybe 
> > other offset value
> > Avgmovps = Offsetps * MA( abs( ROC( C, 1 ) ), 20 );
> > perps = Param( "PivotPS %", 0.3, 0.05, 10, 0.05 );
> > xps = Cum( 1 );
> > Rangeps = 0.01;
> > PSps = TroughBars( L, perps, 1 ) == 0;
> > xaps = LastValue( ValueWhen( PSps, x, 1 ) );//x from last trough
> > Yaps = LastValue( ValueWhen( PSps, L, 1 ) );//y (Low) last trough
> > PRps = PeakBars( H, perps, 1 ) == 0;
> > xbps = LastValue( ValueWhen( PRps, x, 1 ) );//x from last peak
> > Ybps = LastValue( ValueWhen( PRps, H, 1 ) );//y (High) last peak
> > Trough_ReTestps = abs( ( L / yaps ) - 1 ) < Rangeps;
> > Peak_ReTestps = abs( ( H / ybps ) - 1 ) < Rangeps;
> > Trough_Crossps = Cross( yaps, C );
> > Peak_Crossps = Cross( C, ybps );
> >
> > //UP = upSwing DN = downSwing
> > UPps = xbps > xaps;
> > //upSwing
> > DNps = xaps > xbps;
> > //DownSwing
> >
> >
> > RT23_6ps = IIf( UPps, ybps - ( ybps - yaps ) * 0.236, IIf( DNps, yaps + 
> > ( ybps - yaps ) * 0.236, -1e10 ) );
> >
> > RT38_2ps = IIf( UPps, ybps - ( ybps - yaps ) * 0.382, IIf( DNps, yaps + 
> > ( ybps - yaps ) * 0.382, -1e10 ) );
> >
> > RT50_0ps = IIf( UPps, ybps - ( ybps - yaps ) * 0.500, IIf( DNps, yaps + 
> > ( ybps - yaps ) * 0.500, -1e10 ) );
> >
> > RT61_8ps = IIf( UPps, ybps - ( ybps - yaps ) * 0.618, IIf( DNps, yaps + 
> > ( ybps - yaps ) * 0.618, -1e10 ) );
> >
> > RT78_6ps = IIf( UPps, ybps - ( ybps - yaps ) * 0.786, IIf( DNps, yaps + 
> > ( ybps - yaps ) * 0.786, -1e10 ) );
> >
> > //RT127_2 = IIf( UP, yb - ( yb - ya ) * 1.272, IIf( DN, ya + ( yb - ya ) 
> > * 1.272, -1e10 ) );
> >
> > //RT161_8 = IIf( UP, yb - ( yb - ya ) * 1.618, IIf( DN, ya + ( yb - ya ) 
> > * 1.618, -1e10 ) );
> >
> > //RT261_8 = IIf( UP, yb - ( yb - ya ) * 2.618, IIf( DN, ya + ( yb - ya ) 
> > * 2.618, -1e10 ) );
> >
> > //RT = IIf( UP, -100 * ( yb - L ) / ( yb - ya ), 100 * ( H - ya ) / ( yb 
> > - ya ) );//Retracement_Value
> >
> > InZoneps = C<ybps & C>yaps;
> >
> > Plot( IIf( xps > xaps, yaps, -1e10 ), "", colorGold, 1 + 8 );//"Bottom"
> > Plot( IIf( xps > xbps, ybps, -1e10 ), "", colorGold, 1 + 8 );//"Top"
> >
> > xabps = IIf( xbps > xaps, xbps, xaps );
> >
> > //Retracements
> >
> > Plot( IIf( xps >= xabps + 1, RT23_6ps, -1e10 ), "", colorWhite, 
> > styleDashed );//"23,6% Retr."
> >
> > Plot( IIf( xps >= xabps + 1, RT38_2ps, -1e10 ), "", colorGreen, 
> > styleDashed );//"38,2% Retr."
> >
> > Plot( IIf( xps >= xabps + 1, RT50_0ps, -1e10 ), "", colorYellow, 
> > styleDashed );//"50,0% Retr."
> >
> > Plot( IIf( xps >= xabps + 1, RT61_8ps, -1e10 ), "", colorRed, 
> > styleDashed + 8 );//"61,8% Retr."
> >
> > Plot( IIf( xps >= xabps + 1, RT78_6ps, -1e10 ), "", colorBlue, 
> > styleDashed + 8 );//"78,6% Retr."
> >
> > //Plot( IIf( x >= xab + 1, RT127_2, -1e10 ), "", colorSkyblue, 1 
> > );//"127,2% Retr."
> >
> > //Plot( IIf( x >= xab + 1, RT161_8, -1e10 ), "", colorLavender, 1 
> > );//"161,8% Retr."
> >
> > //Plot( IIf( x >= xab + 1, RT261_8, -1e10 ), "", colorDarkGreen, 1 
> > );//"261,8% Retr."
> >
> > Title = StrFormat( "{{NAME}} - {{INTERVAL}} {{DATE}} \nOpen %g \nHigh %g 
> > \nLow %g \nClose %g (%.1f%%) {{VALUES}}\n", O, H, L, C, SelectedValue( 
> > ROC( C, 1 ) ) )
> >          + "per Fib = " + WriteVal( per, 1.1 ) + " \nCurrent Correction 
> > = " + WriteVal( RT, 1.0 ) + "%" + "\nper Fib prev= " + WriteVal( perps, 
> > 1.1 );
> >
> > _SECTION_END();
> >
> >
> >
> >
> > Le 23/12/2009 19:46, kevinoversby a écrit :
> >   
> >> Guys, stay tuned. I am overhauling this code based on:
> >>
> >> http://www.fibonacciqueen.com/public/885.cfm
> >> <http://www.fibonacciqueen.com/public/885.cfm>
> >>
> >> Kevin
> >>
> >> --- In amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>,
> >> reinsley <reinsley@> wrote:
> >>  >
> >>  >
> >>  > Joris,
> >>  >
> >>  > Decrease to 500 does not solve anything.
> >>  >
> >>  >
> >>  > In the chart of the doubtful layout, I removed my two formulas.
> >>  > (5800 bars loaded)
> >>  > Then I loaded your formula, I get error 10 but I double click and the
> >>  > formula was displayed with a correct plot. Before it was not possible.
> >>  > Then I loaded my two formulas ( three formulas loaded, my two plus
> >>  > yours), everything was OK.
> >>  >
> >>  > But no way to reload your formula once more.
> >>  >
> >>  > Something goes wrong with my formulas plus yours.
> >>  >
> >>  > Best regards
> >>  >
> >>  >
> >>  > Le 23/12/2009 16:26, Joris M.schuller a écrit :
> >>  > >
> >>  > >
> >>  > > 1. So apparently it works in another layout. Thatâ??s something.
> >>  > >
> >>  > > 2. The minimum loaded bar number makes sense, since there is a plot
> >> loop
> >>  > > of 900 iterations. For curiosity: change the loop to 500 and see
> >> whether
> >>  > > you now only need 500 bars. That way there is confirmation.
> >>  > >
> >>  > > *From:* amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> [mailto:amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>] *On
> >>  > > Behalf Of *reinsley
> >>  > > *Sent:* Wednesday, December 23, 2009 4:00 AM
> >>  > > *To:* amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>
> >>  > > *Subject:* Re: [amibroker] Re: Writing a fib cluster indicator
> >>  > >
> >>  > >
> >>  > >
> >>  > > Hi Joris,
> >>  > >
> >>  > > Thank you for your comments.
> >>  > >
> >>  > > Into an another old layout, the old formula and the re-posted formula
> >>  > > work fine, both.
> >>  > > The minimum loaded bars is around 900. Below I get the error.
> >>  > > It is OK until 15' TU.
> >>  > >
> >>  > > Before to load the formula into the old layout (where it works) I
> >>  > > modified the blank spaces, I was into my doubtful layout/chart .
> >>  > > My blank bars right margin default value is set to 10.
> >>  > > I modified it to 1 then to 0, after AB reloading, blank space was ok
> >>  > > but error was sill there (in the suspicious layout).
> >>  > > It exist a recent built-in feature to adapt blank space with mouse or
> >>  > > keyboard, but I don't use it as I don't remember the trick.
> >>  > >
> >>  > > I got the same error at the same place in my default layout and 5700
> >>  > > bars loaded.
> >>  > >
> >>  > > array[100*i+10*j+k-111] = t[i] ...
> >>  > > ^
> >>  > > â?`
> >>  > >
> >>  > > I went into an old layout, formula ran well.
> >>  > >
> >>  > > After the successful attempt, I came back to my default layout (the
> >>  > > wrong one) and no way to load the formula.
> >>  > > I have 5700 bars loaded in 5' ( checked with CTRL H cross cursor).
> >>  > >
> >>  > > I checked the AFL in the main AB window, with floating windows, without
> >>  > > floating windows.
> >>  > >
> >>  > > No final clues, except that my others loaded formulas may create a
> >> conflict.
> >>  > > There is no easy way to check which formulas are loaded into AB, I have
> >>  > > to do it manually and check the code.
> >>  > >
> >>  > > NB : A built-in feature that spit, towards txt files or excel, the
> >>  > > loaded fomulas related to layouts, charts and panes will be welcome...
> >>  > >
> >>  > > If the passerby named TJ read this Nota Bene ...
> >>  > >
> >>  > > Best regards
> >>  > >
> >>  > > Le 22/12/2009 23:08, Joris M.schuller a écrit :
> >>  > > >
> >>  > > >
> >>  > > > Reinsley,
> >>  > > >
> >>  > > > An additional point that I forgot to mention. I also checked
> >> whether the
> >>  > > > out of range error you received was caused by selected blank bars
> >>  > > > setting, which in the past in some afl would give an out-of-range
> >> error.
> >>  > > > (Tools/Preferences/blank bars). With and without blank bars,
> >> everything
> >>  > > > works fine. So check whether the re-posted afl, which is the same
> >> as the
> >>  > > > previous one, now does the trick. Good luck.
> >>  > > >
> >>  > > > *From:* amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >> [mailto:amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>] *On
> >>  > > > Behalf Of *Joris Schuller
> >>  > > > *Sent:* Tuesday, December 22, 2009 3:56 PM
> >>  > > > *To:* amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> <mailto:amibroker%40yahoogroups.com>
> >>  > > > *Subject:* RE: [amibroker] Re: Writing a fib cluster indicator
> >>  > > >
> >>  > > > Kevin,
> >>  > > >
> >>  > > > I understand that you had an error when displaying the afl. The afl I
> >>  > > > sent you works. Most of the time before I send out code,
> >> including this
> >>  > > > time I first send the email from Outlook to one of my online accounts
> >>  > > > (e.g. gmail, hotmail). From there I copy the code back into the AB
> >>  > > > editor and verify that it displays properly. This morning I repeated
> >>  > > > that process again and had no problems. Below a copy of the original
> >>  > > > afl. See whether it 2^nd time around works.
> >>  > > >
> >>  > > > I looked a little bit more at your afl. I believe there are some
> >> errors.
> >>  > > > In a couple of days I will send you some changes/additions which will
> >>  > > > facilitate localizing the problem.
> >>  > > >
> >>  > > > //===============Verify that afl below works===============
> >>  > > >
> >>  > > > //=========================Begin Original Fibonacci Levels-Original
> >>  > > > =====================================
> >>  > > > *Title* = EncodeColor(4)+ _DEFAULT_NAME()+"; "+EncodeColor(1) +
> >>  > > > StrFormat("{{NAME}} - {{INTERVAL}}; {{DATE}}; O=%g, H=%g, L=%g, C=%g
> >>  > > > (%.1f%%)
> >>  > > > {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 ) ) );
> >>  > > > SetBarsRequired(*sbrAll*,*sbrAll*);
> >>  > > > //============== Begin Addition===================
> >>  > > > Plot(*C*,"C",1,64);
> >>  > > > ZigZagHL=ParamToggle("ZigZagHL","Off|On",1);
> >>  > > > NoOfLastPeaksTroughs=Param("NoOfLastPeaksTroughs",9,1,10,1);
> >>  > > > NoOfFibonacciLevels=Param("NoOfFibonacciLevels",9,1,10,1);
> >>  > > > Adjfactor=Param("Adjfactor",0.003,0,0.05,0.001); //Forex values;
> >>  > > > MinPlotValue=(1-Adjfactor)*LowestVisibleValue(*L*);
> >>  > > > MaxPlotValue=(1+Adjfactor)*HighestVisibleValue(*H*);
> >>  > > > Plot(MinPlotValue,"MinPlotValue",*colorGreen*,5);
> >>  > > > Plot(MaxPlotValue,"MaxPlotValue",4,5);
> >>  > > > //===============End Addition===========
> >>  > > > n = 0.3 ;//approx. 4 point swing on ES
> >>  > > > //fibs[1] = .62; fibs[2] = .27; fibs[3] = 0.01; fibs[4] = .38;
> >> fibs[5] =
> >>  > > > .5;//added ?????????? fibs[3] = 0.01??;fibs[1]=fibs [6] = .62????????
> >>  > > > fibs[2] = .27;???????
> >>  > > > //fibs [6] = .62; fibs[7] = 1; fibs[8] = 1.27; fibs[9] = 1.62; //9
> >>  > > > symmetric levels//added????????(instead
> >>  > > > of:0,0.236,0.382,0.5,0.618,0.786.1,1.272)
> >>  > > > fibs[1] = 0.0; fibs[2] = .238; fibs[3] = .382; fibs[4] = .5;//added
> >>  > > > ?????????? fibs[3] = 0.01??;fibs[1]=fibs [6] = .62???????? fibs[2] =
> >>  > > > .27;???????
> >>  > > > fibs [5] = .618; fibs[6] = 0.786;fibs[7] = 1; fibs[8] = 1.272;
> >> fibs[9] =
> >>  > > > 1.618;//for(i=1;i<=9;i++) //Original
> >>  > > > *for*(i=1;i<=NoOfLastPeaksTroughs;i++)//Added
> >>  > > > {
> >>  > > > p[i] = LastValue(ValueWhen(PeakBars(*H*,n)==0,*H*,i)); //last 9 peaks
> >>  > > > t[i] = LastValue(ValueWhen(TroughBars(*L*,n)==0,*L*,i));//last 9
> >> troughs
> >>  > > > //for(j=1;j<=9;j++) //Original
> >>  > > > *for*(j=1;j<=NoOfLastPeaksTroughs;j++) //added
> >>  > > > {
> >>  > > > //for(k=1;k<=9;k++)
> >>  > > > *for*(k=1;k<=NoOfFibonacciLevels;k++) //added assumed that this
> >> are the
> >>  > > > Fibonacct levels
> >>  > > > {
> >>  > > > array[100*i+10*j+k-111] = t[i] + fibs[k] * (p[j] - t[i]); // calc fib
> >>  > > > levels //added might have to adjust the constants(100,10,111) to
> >> reflect
> >>  > > > the param values
> >>  > > > }}}
> >>  > > > // Plot levels for testing purposes
> >>  > > > *for*(i=1;i<=900;i++) {
> >>  > > > //Plot(IIf(array[i]>0,array[i],-1e10),"a",colorBlue); //Original
> >>  > > > Plot(IIf(array[i]>MinPlotValue *AND*
> >>  > > > array[i]<MaxPlotValue,array[i],-1e10),"a",*colorBlue*);//Added
> >>  > > > }
> >>  > > > //==============ZigZagHL=========================added
> >>  > > > *if* (ZigZagHL)
> >>  > > > {
> >>  > > > //added
> >>  > > > Plot( *C*, "Close", 1,64);
> >>  > > > zigpct = Param( "ZigHL %",0.2,0.01,10,0.01);
> >>  > > > ATRmult = Param("ATRmult",1.8,0.1,3,0.1);
> >>  > > > Arrowadj = Param("Arrowadj; ",12,2,25,1);
> >>  > > > HHLLSel = ParamToggle("Each Pk/Tr|HH/LL","Each Pk/Tr|HH/LL",1);
> >>  > > > pk=PeakBars(*H*,zigpct)==0;
> >>  > > > tr=TroughBars(*L*,zigpct)==0;
> >>  > > > zHi=Zig(*H*,zigpct); zLo=Zig(*L*,zigpct); HLAvg=(zHi+zLo)/2;
> >>  > > > zp=IIf(pk,zHi,IIf(tr,zLo,IIf(HLAvg>Ref(HLAvg,-1),*H*,*L*)));
> >>  > > > zag=Zig(zp,zigpct);
> >>  > > > pR=Ref(zag,-1)<zag *AND* zag>Ref(zag,1);
> >>  > > > pS=Ref(zag,-1)>zag *AND* zag<Ref(zag,1);
> >>  > > > Plot(*C*,"C",1,64);
> >>  > > > Plot(zag,"",11,1|*styleNoLabel*);//Zig H-L
> >>  > > > PlotShapes(*shapeDownArrow**pR,*colorGreen*,0,*H*,-Arrowadj);
> >>  > > > PlotShapes(*shapeUpArrow**pS,*colorRed*,0,*L*,-Arrowadj);
> >>  > > > *if*(HHLLSel)
> >>  > > > {
> >>  > > > HH=((zag>Ref(zag,- 1) *AND* zag > Ref(zag,1)) *AND*
> >> (Peak(zag,zigpct,1
> >>  > > > )>Peak(zag,zigpct,2 ))); //HH
> >>  > > > LL=((zag<Ref(zag,- 1) *AND* zag < Ref(zag,1)) *AND*
> >> (Trough(zag,zigpct,1
> >>  > > > ) <Trough(zag,zigpct,2 ))); //LL
> >>  > > > }
> >>  > > > *if*(!HHLLSel)
> >>  > > > {
> >>  > > > HH=((zag>Ref(zag,- 1) *AND* zag > Ref(zag,1)));
> >>  > > > LL=((zag<Ref(zag,- 1) *AND* zag < Ref(zag,1)));
> >>  > > > }
> >>  > > > dist = ATRmult*ATR (20);//might not want that
> >>  > > > *for*( i = 0; i < *BarCount*; i++ )
> >>  > > > {
> >>  > > > // ONLY THIS should be inside the loop
> >>  > > > *if*( HH [i]) PlotText( "HH"+ "\n"+*H*[ i ], i, *H*[ i ]+dist[i],
> >>  > > > *colorGreen* );
> >>  > > > *if*( LL [i] ) PlotText( ""+*L*[ i ]+"\nLL", i, *L*[ i ]-dist[i],
> >>  > > > *colorRed* );
> >>  > > > }
> >>  > > > }
> >>  > > > //=========================End Original Fibonacci Levels-Original
> >>  > > > =====================================
> >>  > > >
> >>  > > > *From:* amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >> [mailto:amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>] *On
> >>  > > > Behalf Of *kevinoversby
> >>  > > > *Sent:* Monday, December 21, 2009 3:35 PM
> >>  > > > *To:* amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> <mailto:amibroker%40yahoogroups.com>
> >>  > > > *Subject:* [amibroker] Re: Writing a fib cluster indicator
> >>  > > >
> >>  > > > Hi Joris,
> >>  > > >
> >>  > > > Thanks very much for your comments, I will work on it further
> >> tonight.
> >>  > > > Regarding the levels, the first three were intended to be the
> >> extensions
> >>  > > > -.62, -.27 & 0 but there was a problem at the time with negative
> >> values
> >>  > > > (now solved). I agree .786 & .236 were missing.
> >>  > > >
> >>  > > > The idea behind adjusting the array indexing by 111 was to start
> >> at zero
> >>  > > > (when i=j=k=1, array index = 111 - 111) but this is not necessary, or
> >>  > > > could be fixed by starting i,j & k at zero.
> >>  > > >
> >>  > > > Kevin
> >>  > > >
> >>  > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>,
> >>  > > > "Joris Schuller" <jschuller@> wrote:
> >>  > > > >
> >>  > > > > Don't know how experienced you are; with that in mind, I would
> >> first
> >>  > > > > simplify code verification somewhat:
> >>  > > > >
> >>  > > > > 1. limit the plot to the current meaningful visible section by
> >> using
> >>  > > > > MinPlotValue=(1-Adjfactor)*LowestVisibleValue(L) and
> >>  > > > > MaxPlotValue=(1+Adjfactor)*HighestVisibleValue(H);
> >>  > > > >
> >>  > > > > 2. start with and verify a simple case (1 pair of peaks and
> >>  > > troughs) and
> >>  > > > > expand from that. Compare results with the results using the
> >> Fibonacci
> >>  > > > > toolbar
> >>  > > > >
> >>  > > > > 3. use params to be able to methodically build up in complexity
> >>  > > > >
> >>  > > > > 4. turn on/off the included ZigZagHL to verify that the correct
> >>  > > > > peaks/troughs are selected
> >>  > > > >
> >>  > > > > 5. verify that the (incorrect) Fib levels you selected are what you
> >>  > > want
> >>  > > > >
> >>  > > > > 6. convert the constants in the Fib level loop (10,100,111) to
> >> params
> >>  > > > > (currently incorrect Fib values are displayed).
> >>  > > > >
> >>  > > > > 7. changes are prefaced by "added"
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > > The proposed changes are shown below.
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > > Title = EncodeColor(4)+ _DEFAULT_NAME()+"; "+EncodeColor(1) +
> >>  > > > > StrFormat("{{NAME}} - {{INTERVAL}}; {{DATE}}; O=%g, H=%g, L=%g,
> >> C=%g
> >>  > > > > (%.1f%%)
> >>  > > > > {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 ) ) );
> >>  > > > > SetBarsRequired(sbrAll,sbrAll);
> >>  > > > > //============== added; Begin First Addition===================
> >>  > > > > Plot(C,"C",1,64);
> >>  > > > > ZigZagHL=ParamToggle("ZigZagHL","Off|On",1);
> >>  > > > > NoOfLastPeaksTroughs=Param("NoOfLastPeaksTroughs",9,1,10,1);
> >>  > > > > NoOfFibonacciLevels=Param("NoOfFibonacciLevels",9,1,10,1);
> >>  > > > > Adjfactor=Param("Adjfactor",0.003,0,0.05,0.001); //added. Forex
> >>  > > > values; for
> >>  > > > > stocks use change as necessary
> >>  > > > > MinPlotValue=(1-Adjfactor)*LowestVisibleValue(L);
> >>  > > > > MaxPlotValue=(1+Adjfactor)*HighestVisibleValue(H);
> >>  > > > > Plot(MinPlotValue,"MinPlotValue",colorGreen,5);
> >>  > > > > Plot(MaxPlotValue,"MaxPlotValue",4,5);
> >>  > > > > //===============End First Addition===========
> >>  > > > > n = 0.3 ;//approx. 4 point swing on ES
> >>  > > > > //fibs[1] = .62; fibs[2] = .27; fibs[3] = 0.01; fibs[4] = .38;
> >>  > > fibs[5] =
> >>  > > > > .5;//added ?????????? fibs[3] = 0.01??;fibs[1]=fibs [6] =
> >> .62????????
> >>  > > > > fibs[2] = .27;???????
> >>  > > > > //fibs [6] = .62; fibs[7] = 1; fibs[8] = 1.27; fibs[9] = 1.62; //9
> >>  > > > symmetric
> >>  > > > > levels//added????????(instead
> >> of:0,0.236,0.382,0.5,0.618,0.786.1,1.272)
> >>  > > > > fibs[1] = 0.0; fibs[2] = .238; fibs[3] = .382; fibs[4] = .5;//added
> >>  > > > > ?????????? fibs[3] = 0.01??;fibs[1]=fibs [6] = .62????????
> >> fibs[2] =
> >>  > > > > .27;???????
> >>  > > > > fibs [5] = .618; fibs[6] = 0.786;fibs[7] = 1; fibs[8] = 1.272;
> >>  > > fibs[9] =
> >>  > > > > 1.618;//for(i=1;i<=9;i++) //Original
> >>  > > > > for(i=1;i<=NoOfLastPeaksTroughs;i++)//Added
> >>  > > > > {
> >>  > > > > p[i] = LastValue(ValueWhen(PeakBars(H,n)==0,H,i)); //last 9 peaks
> >>  > > > > t[i] = LastValue(ValueWhen(TroughBars(L,n)==0,L,i));//last 9
> >> troughs
> >>  > > > >
> >>  > > > > //for(j=1;j<=9;j++) //Original
> >>  > > > > for(j=1;j<=NoOfLastPeaksTroughs;j++) //added
> >>  > > > > {
> >>  > > > > //for(k=1;k<=9;k++)
> >>  > > > > for(k=1;k<=NoOfFibonacciLevels;k++) //added; assumed that this
> >> are the
> >>  > > > > Fibonacci levels
> >>  > > > > {
> >>  > > > > array[100*i+10*j+k-111] = t[i] + fibs[k] * (p[j] - t[i]); //
> >> calc fib
> >>  > > > levels
> >>  > > > > //added; might have to adjust the constants(100,10,111) to
> >> reflect the
> >>  > > > > param values
> >>  > > > > }}}
> >>  > > > > // Plot levels for testing purposes
> >>  > > > > for(i=1;i<=900;i++) {
> >>  > > > > //Plot(IIf(array[i]>0,array[i],-1e10),"a",colorBlue); //Original
> >>  > > > > Plot(IIf(array[i]>MinPlotValue AND
> >>  > > > > array[i]<MaxPlotValue,array[i],-1e10),"a",colorBlue);//Added
> >>  > > > > }
> >>  > > > >
> >>  > > > > //==============ZigZagHL; added for verification
> >>  > > > > purposes=========================
> >>  > > > > if (ZigZagHL)
> >>  > > > > {
> >>  > > > > //added
> >>  > > > > Plot( C, "Close", 1,64);
> >>  > > > > zigpct = Param( "Zag %",0.2,0.01,10,0.01);
> >>  > > > > ATRmult = Param("ATRmult",1.8,0.1,3,0.1);
> >>  > > > > Arrowadj = Param("Arrowadj; ",12,2,25,1);
> >>  > > > > HHLLSel = ParamToggle("Each Pk/Tr|HH/LL","Each Pk/Tr|HH/LL",1);
> >>  > > > > pk=PeakBars(H,zigpct)==0;
> >>  > > > > tr=TroughBars(L,zigpct)==0;
> >>  > > > > zHi=Zig(H,zigpct); zLo=Zig(L,zigpct); HLAvg=(zHi+zLo)/2;
> >>  > > > > zp=IIf(pk,zHi,IIf(tr,zLo,IIf(HLAvg>Ref(HLAvg,-1),H,L)));
> >>  > > > > zag=Zig(zp,zigpct);
> >>  > > > > pR=Ref(zag,-1)<zag AND zag>Ref(zag,1);
> >>  > > > > pS=Ref(zag,-1)>zag AND zag<Ref(zag,1);
> >>  > > > > Plot(C,"C",1,64);
> >>  > > > > Plot(zag,"",11,1|styleNoLabel);//Zig H-L
> >>  > > > > PlotShapes(shapeDownArrow*pR,colorGreen,0,H,-Arrowadj);
> >>  > > > > PlotShapes(shapeUpArrow*pS,colorRed,0,L,-Arrowadj);
> >>  > > > > if(HHLLSel)
> >>  > > > > {
> >>  > > > > HH=((zag>Ref(zag,- 1) AND zag > Ref(zag,1)) AND (Peak(zag,zigpct,1
> >>  > > > > )>Peak(zag,zigpct,2 ))); //HH
> >>  > > > > LL=((zag<Ref(zag,- 1) AND zag < Ref(zag,1)) AND
> >> (Trough(zag,zigpct,1 )
> >>  > > > > <Trough(zag,zigpct,2 ))); //LL
> >>  > > > > }
> >>  > > > > if(!HHLLSel)
> >>  > > > > {
> >>  > > > > HH=((zag>Ref(zag,- 1) AND zag > Ref(zag,1)));
> >>  > > > > LL=((zag<Ref(zag,- 1) AND zag < Ref(zag,1)));
> >>  > > > > }
> >>  > > > > dist = ATRmult*ATR (20);//might not want that
> >>  > > > > for( i = 0; i < BarCount; i++ )
> >>  > > > > {
> >>  > > > > // ONLY THIS should be inside the loop
> >>  > > > > if( HH [i]) PlotText( "HH"+ "\n"+H[ i ], i, H[ i ]+dist[i],
> >>  > > > colorGreen );
> >>  > > > > if( LL [i] ) PlotText( ""+L[ i ]+"\nLL", i, L[ i ]-dist[i],
> >> colorRed );
> >>  > > > > }
> >>  > > > > }
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > > From: amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > > [mailto:amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >> <mailto:amibroker%40yahoogroups.com>]
> >>  > > > On Behalf
> >>  > > > > Of kevinoversby
> >>  > > > > Sent: Saturday, December 19, 2009 4:32 PM
> >>  > > > > To: amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > > Subject: [amibroker] Re: Writing a fib cluster indicator
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > > >
> >>  > > >
> >>  > >
> >> http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004>
> >>  > >
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004>>
> >>  > > >
> >>  > >
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004>
> >>  > >
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004
> >> <http://groups.yahoo.com/group/amibroker/photos/album/1601688415/pic/10192004>>>
> >>  > > > > 79/view
> >>  > > > >
> >>  > > > > See link for plot of unfiltered levels. Levels will be filtered by
> >>  > > > proximity
> >>  > > > > and could also be weighted, for example, by size of swing producing
> >>  > > them.
> >>  > > > >
> >>  > > > > Constructive comments welcome and appreciated.
> >>  > > > >
> >>  > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com> ,
> >>  > > > > "kevinoversby" <kevinoversby@> wrote:
> >>  > > > > >
> >>  > > > > >
> >>  > > > > >
> >>  > > > > > OK, its running stably now, execution time well under 0.5 s. Next
> >>  > > steps
> >>  > > > > are to sort the levels and detect clusters for plotting.
> >>  > > > > >
> >>  > > > > > If I try to set any of the fibs values to negative values
> >> they are
> >>  > > > > returned as {EMPTY} - why is that?
> >>  > > > > >
> >>  > > > > > Thanks / Kevin
> >>  > > > > >
> >>  > > > > > SetBarsRequired(sbrAll,sbrAll);
> >>  > > > > >
> >>  > > > > > n = 0.3 ;//approx. 4 point swing on ES
> >>  > > > > > fibs[1] = .62; fibs[2] = .27; fibs[3] = 0.01; fibs[4] = .38;
> >>  > > > fibs[5] = .5;
> >>  > > > > > fibs [6] = .62; fibs[7] = 1; fibs[8] = 1.27; fibs[9] = 1.62; //9
> >>  > > > symmetric
> >>  > > > > levels
> >>  > > > > >
> >>  > > > > > for(i=1;i<=9;i++)
> >>  > > > > > {
> >>  > > > > >
> >>  > > > > > p[i] = LastValue(ValueWhen(PeakBars(H,n)==0,H,i)); //last 9 peaks
> >>  > > > > > t[i] = LastValue(ValueWhen(TroughBars(L,n)==0,L,i));//last 9
> >> troughs
> >>  > > > > >
> >>  > > > > > for(j=1;j<=9;j++)
> >>  > > > > > {
> >>  > > > > > for(k=1;k<=9;k++)
> >>  > > > > > {
> >>  > > > > >
> >>  > > > > > array[100*i+10*j+k-111] = t[i] + fibs[k] * (p[j] - t[i]); //
> >> calc fib
> >>  > > > > levels
> >>  > > > > > }}}
> >>  > > > > >
> >>  > > > > > // Plot levels for testing purposes
> >>  > > > > >
> >>  > > > > > for(i=1;i<=900;i++) {
> >>  > > > > > Plot(IIf(array[i]>0,array[i],-1e10),"a",colorBlue);
> >>  > > > > > }
> >>  > > > > >
> >>  > > > > >
> >>  > > > > >
> >>  > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com> <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com> ,
> >>  > > > > "kevinoversby" <kevinoversby@> wrote:
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > > I've now got the levels plotting on ES 15 second data and its
> >>  > > > actually
> >>  > > > > quite fast as the array function calls are in a small loop. The
> >>  > > > strange part
> >>  > > > > is that the array reverts to empty shortly after plotting. Can
> >>  > > anyone see
> >>  > > > > why?
> >>  > > > > > >
> >>  > > > > > > Thanks / Kevin
> >>  > > > > > >
> >>  > > > > > >
> >>  > > > > > > n = 0.3 ; //approx. 4 point swing on ES
> >>  > > > > > > fibs[1] = -.62; fibs[2] = -.27; fibs[3] = 0; fibs[4] = .38;
> >>  > > fibs[5] =
> >>  > > > > .5;
> >>  > > > > > > fibs [6] = .62; fibs[7] = 1; fibs[8] = 1.27; fibs[9] =
> >> 1.62; //9
> >>  > > > > symmetric levels
> >>  > > > > > >
> >>  > > > > > > PeakCondition=PeakBars(H,n)==0;
> >>  > > > > > > TroughCondition=TroughBars(L,n)==0;
> >>  > > > > > >
> >>  > > > > > > for(i=1;i<=10;i++)
> >>  > > > > > > {
> >>  > > > > > >
> >>  > > > > > > p[i]=LastValue(ValueWhen(PeakCondition,H,i));
> >>  > > > > > > t[i] = LastValue(ValueWhen(TroughCondition,L,i));
> >>  > > > > > >
> >>  > > > > > > for(j=1;j<=10;j++)
> >>  > > > > > > {
> >>  > > > > > > for(k=1;k<=5;k++)
> >>  > > > > > > {
> >>  > > > > > >
> >>  > > > > > > array[i+j+k-2] = t[i] + fibs[k] * (p[j] - t[i]); // calc
> >> fib levels
> >>  > > > > > > }}}
> >>  > > > > > >
> >>  > > > > > > // Plot first 100 unfiltered levels for test purposes
> >>  > > > > > >
> >>  > > > > > > for(i=1;i<=100;i++) {
> >>  > > > > > > Plot(IIf(array[i]>0,array[i],-1e10),"a",colorBlue);
> >>  > > > > > > }
> >>  > > > > > >
> >>  > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com> ,
> >>  > > > > "kevinoversby" <kevinoversby@> wrote:
> >>  > > > > > > >
> >>  > > > > > > > Hi Mike,
> >>  > > > > > > >
> >>  > > > > > > > Thank you very much for taking the time to post these tips. I
> >>  > > will
> >>  > > > > incorporate as much as I can and post the update later.
> >>  > > > > > > >
> >>  > > > > > > >
> >>  > > > > > > > Kevin
> >>  > > > > > > >
> >>  > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com>
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > > > , "Mike" <sfclimbers@> wrote:
> >>  > > > > > > > >
> >>  > > > > > > > > Hi,
> >>  > > > > > > > >
> >>  > > > > > > > > A couple of quick points to spare you some wasted time.
> >>  > > > > > > > >
> >>  > > > > > > > > 1. In general; I think that you would benifet greatly by
> >>  > > > reading the
> >>  > > > > following:
> >>  > > > > > > > >
> >>  > > > > > > > > http://www.amibroker.com/guide/h_understandafl.html
> >> <http://www.amibroker.com/guide/h_understandafl.html>
> >>  > > <http://www.amibroker.com/guide/h_understandafl.html
> >> <http://www.amibroker.com/guide/h_understandafl.html>>
> >>  > > > <http://www.amibroker.com/guide/h_understandafl.html
> >> <http://www.amibroker.com/guide/h_understandafl.html>
> >>  > > <http://www.amibroker.com/guide/h_understandafl.html
> >> <http://www.amibroker.com/guide/h_understandafl.html>>>
> >>  > > > > > > > >
> >>  > > > > > > > > 2. You *really* do not want to be making array based
> >> function
> >>  > > > calls
> >>  > > > > (e.g. PeakBars, ValueWhen, IIF, TroughBars, etc) within a loop.
> >> This
> >>  > > > will be
> >>  > > > > horribly slow. Look for a way to calculate everything outside of a
> >>  > > loop.
> >>  > > > > > > > >
> >>  > > > > > > > > 3. The termination check of all your for loops are
> >> incorrect.
> >>  > > > Do not
> >>  > > > > use "i = 10". You probably want something like "i <= 10". It
> >> needs to
> >>  > > > be a
> >>  > > > > boolean if you ever want it to terminate. Also "=" is assignment,
> >>  > > "==" is
> >>  > > > > equivalence test.
> >>  > > > > > > > >
> >>  > > > > > > > > http://www.amibroker.com/guide/a_mistakes.html
> >> <http://www.amibroker.com/guide/a_mistakes.html>
> >>  > > <http://www.amibroker.com/guide/a_mistakes.html
> >> <http://www.amibroker.com/guide/a_mistakes.html>>
> >>  > > > <http://www.amibroker.com/guide/a_mistakes.html
> >> <http://www.amibroker.com/guide/a_mistakes.html>
> >>  > > <http://www.amibroker.com/guide/a_mistakes.html
> >> <http://www.amibroker.com/guide/a_mistakes.html>>>
> >>  > > > > > > > >
> >>  > > > > > > > > 4. When trying to populate an array inside a loop, you
> >>  > > generally
> >>  > > > > should be populating bar by bar: e.g. array[i] = ...
> >>  > > > > > > > >
> >>  > > > > > > > > Mike
> >>  > > > > > > > >
> >>  > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > > <mailto:amibroker%40yahoogroups.com> , "kevinoversby"
> >> <kevinoversby@>
> >>  > > > wrote:
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > > Parts 1) & 2)
> >>  > > > > > > > > >
> >>  > > > > > > > > > n = 0.3 //approx. 4 point swing on ES
> >>  > > > > > > > > > fibs = [-.62 -.27 0 .38 .5 .62 1 1.27 1.62]; //symmetric
> >>  > > > > > > > > >
> >>  > > > > > > > > > for(i=1;i=10;i++)
> >>  > > > > > > > > > {
> >>  > > > > > > > > > PeakCondition=PeakBars(H,n)==0;
> >>  > > > > > > > > > p[i] = ValueWhen(PeakCondition,H,i);
> >>  > > > > > > > > > p[i] = IIf(p[i] >= HHV(p,i),p[i],0); //set to zero if
> >> not HH
> >>  > > > > > > > > >
> >>  > > > > > > > > > TroughCondition=TroughBars(L,n)==0;
> >>  > > > > > > > > > t[i] = ValueWhen(TroughCondition,L,i);
> >>  > > > > > > > > > t[i] = IIf(t[i] <= LLV(t,i),t[i],0); //set to zero if
> >> not LL
> >>  > > > > > > > > >
> >>  > > > > > > > > > for(j=1;j=10;j++)
> >>  > > > > > > > > > {
> >>  > > > > > > > > > for(k=1;k=9;k++)
> >>  > > > > > > > > > {
> >>  > > > > > > > > >
> >>  > > > > > > > > > array = t[i] + fibs[k] * (p[j] - t[i]); // calc fib
> >> levels
> >>  > > > > > > > > > }}}
> >>  > > > > > > > > >
> >>  > > > > > > > > > I'm unsure of the last line - how to assign the fib
> >> levels
> >>  > > > to an
> >>  > > > > array for sorting. Thanks in advance for any help.
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > > Kevin
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> >> <mailto:amibroker%40yahoogroups.com>
> >>  > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > <mailto:amibroker%40yahoogroups.com>
> >>  > > > > <mailto:amibroker%40yahoogroups.com> , "kevinoversby"
> >> <kevinoversby@>
> >>  > > > wrote:
> >>  > > > > > > > > > >
> >>  > > > > > > > > > > I have not found an AFL implementation of this so
> >>  > > decided to
> >>  > > > > develop my own. I'm doing it here as there are a couple of coding
> >>  > > > issues I'm
> >>  > > > > unsure of. Constructive comments and tips most welcome.
> >>  > > > > > > > > > >
> >>  > > > > > > > > > > Process:
> >>  > > > > > > > > > >
> >>  > > > > > > > > > > 1) Find i last higher peaks and j last lower troughs
> >>  > > > > > > > > > > 2) For each peak/trough pair, calculate fib levels and
> >>  > > add to
> >>  > > > > array
> >>  > > > > > > > > > > 3) Sort array
> >>  > > > > > > > > > > 4) Discard a level if distance to next level >
> >> tolerance
> >>  > > > > > > > > > > 5) Plot remaining levels, preferably at left or right
> >>  > > > edge like
> >>  > > > > volume at price (VAP) to simplify chart.
> >>  > > > > > > > > > >
> >>  > > > > > > > > > > (A thought just occurred that this would also be a
> >> useful
> >>  > > > > exercise with VAP levels - investigate later).
> >>  > > > > > > > > > >
> >>  > > > > > > > > > >
> >>  > > > > > > > > > > Kevin
> >>  > > > > > > > > > >
> >>  > > > > > > > > >
> >>  > > > > > > > >
> >>  > > > > > > >
> >>  > > > > > >
> >>  > > > > >
> >>  > > > >
> >>  > > >
> >>  > > >
> >>  > >
> >>  > > --
> >>  > > Best regards
> >>  > >
> >>  > >
> >>  >
> >>  >
> >>  > --
> >>  > Best regards
> >>  >
> >>
> >>
> >>     
> >
> >
> >
>




------------------------------------

**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.

TO GET TECHNICAL SUPPORT send an e-mail directly to 
SUPPORT {at} amibroker.com

TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)

For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/amibroker/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/amibroker/join
    (Yahoo! ID required)

<*> To change settings via email:
    amibroker-digest@xxxxxxxxxxxxxxx 
    amibroker-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    amibroker-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/