|
PureBytes Links
Trading Reference Links
|
Asis,
Until you update to the newer version 5.29.2 you will not be able to run the code successfully.
David K.
--- In amibroker@xxxxxxxxxxxxxxx, Asis Ghosh <subhamedicalsjpg@xxx> wrote:
>
> Attached is the error snap-shot---I think--there may be time zone
> difference--I am in India--my AMI time is +11 hours than default
> ET--enclosed also the AFL file--please have a look into it(My Version is
> 4.8.2)
>
> Asis
>
>
> wooziwog wrote:
> >
> >
> > Asis,
> >
> > I copy and pasted the afl below into a new afl chart and did not
> > receive any errors. I tried all parameter variations and still was not
> > able to replicate the error message you describe.
> >
> > David K.
> >
> > --- In amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>,
> > Asis Ghosh <subhamedicalsjpg@> wrote:
> > >
> > > Hello,
> > >
> > > I put this AFL --there is some minor error--(not producing any
> > signal in
> > > the chart)--ERROR MESSAGE: ERROR-29>>VARIABLE GTEXT BEING USED WITHOUT
> > > BEING INITIALIZED
> > >
> > > Can any one rectify this error ?
> > >
> > > Asis
> > >
> > >
> > > wooziwog wrote:
> > > >
> > > >
> > > > Reinsley,
> > > >
> > > > Thanks for the feedback. Replace your copy with the code below and
> > you
> > > > will not receive the message. The "Plot Shapes" is for plotting
> > starts
> > > > at the Highs and Lows of the various pivots - I have never used it so
> > > > I can't be sure that all is right. The error message you received was
> > > > due to the fact that the arrays were not turned on when the plot
> > > > shapes was turned on. To minimize execution time on my intraday
> > charts
> > > > I avoid executing the arrays when the lines or text are not being
> > > > used. Now the arrays will also be processed when plot shapes are
> > > > turned on. I have not tested the shapes plot yet - it is supposed to
> > > > plot stars at the highs and lows of the various time frames. Let me
> > > > know how it works :-)
> > > >
> > > > David K.
> > > >
> > > > //======================
> > > > _SECTION_BEGIN("Chart Settings");
> > > > //======================
> > > > SetChartOptions(0, chartShowDates);
> > > > SetChartBkColor(1);
> > > > GraphXSpace=Param("GraphXSpace",15,0,300,1);
> > > > dec= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
> > > > bc = BarCount-1;
> > > > bi = BarIndex();
> > > > Lbi = LastValue(bi);
> > > > sbi = SelectedValue(BarIndex());
> > > > tn = TimeNum();
> > > > Plot(C,"",IIf(C>O,34,IIf(C<O,32,55)),128,4);
> > > > //======================
> > > > pxchartright = Status("pxChartRight");//returns y-coordinate of
> > > > top-left corner
> > > > //======================
> > > > _SECTION_BEGIN("GFX X Conversion");
> > > > function tpX(bar) {
> > > > lvb = Status("LastVisibleBar");
> > > > fvb = Status("FirstVisibleBar");
> > > > pxchartleft = Status("pxChartLeft");
> > > > pxchartright = Status("pxChartRight");
> > > > pxheight = Status("pxheight");
> > > > pxchartwidth = Status("pxChartWidth");
> > > > return pxchartleft+(bar-fvb)*pxchartwidth/(Lvb-fvb+1); }
> > > > _SECTION_END();
> > > > //======================
> > > > _SECTION_BEGIN("GFX Y Conversion");
> > > > function tPY(Value) {
> > > > local Miny, Maxy, pxchartbottom, pxchartheight;
> > > > Miny = Status("AxisMiny");
> > > > Maxy = Status("AxisMaxy");
> > > > pxchartbottom = Status("pxChartBottom");
> > > > pxchartheight = Status("pxChartHeight");
> > > > return pxchartbottom - floor(0.5
> > > > +(Value-Miny)*pxchartheight/(Maxy-Miny)); }
> > > > _SECTION_END();
> > > > //======================
> > > > _SECTION_BEGIN("GFX Text+Label, GFX Y, Std X");
> > > > //======================
> > > > dec=0; ha=0;
> > > > procedure gtx(val,color,string,xpos) {
> > > > GfxSetTextColor(color);
> > > > gtext=GfxDrawText(NumToStr(val,dec)+"-"+
> > > > StrExtract(string,0)+" ",xpos,tpY(SelectedValue(val))+ha,0,0,256);
> > > > return gtext; }
> > > > _SECTION_END();
> > > > //======================
> > > > _SECTION_BEGIN("Plot Shapes");
> > > > //======================
> > > > procedure plshp(x,y,shape,color,shift)
> > > > { PlotShapes(IIf(BarIndex()==x,shape,0),color,0,y,shift); }
> > > > //===========================
> > > > lls=0; sln=0;
> > > > procedure hrplt(tf,value,color,sty,shf) {
> > > > Lin=LineArray(Lbi-lls-shf,LastValue(value),
> > > > Lbi+shf,LastValue(value),1);
> > > > Plot(IIf(tf AND sln==0,value,Null),"",color,sty,0,0,shf);
> > > > Plot(IIf(sln==1,Lin,Null),"",color,sty,0,0,shf); }
> > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > //Time and Dates
> > > > begD = DateNum() != Ref(DateNum(),-1);//Begin New Day
> > > > fboD = LastValue(ValueWhen(begD,bi,1));//First Bar of Day
> > > > endD = DateNum() != Ref(DateNum(), 1);//End of Day
> > > > lboD = LastValue(ValueWhen(endD,bi,1));//Last Bar of Day
> > > > lbpd = LastValue(ValueWhen(begD,bi,2)-1);//Last Bar of Previous Day
> > > > tday = DateNum()==LastValue(DateNum(),1);//Includes current fbod to
> > > > future lbod
> > > > pdaz= ValueWhen(begD,Ref(DateNum(),-1),1);//All bars prior to
> > existing
> > > > lbod
> > > > prdaz=pdaz AND NOT tday;
> > > > notda= NOT tday;
> > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > _SECTION_BEGIN("Intraday Time Pivots");
> > > > //===============================
> > > > ipv = ParamList("Sup Res
> > Pivots","Off|All|Calculate|OHLC|Lines|Labels",3);
> > > > psh= ParamToggle("Plot Shapes", "Off|On",0);
> > > > htx = Param("Text Shift",18,-200,150,1);
> > > > sln= ParamToggle("Short Lines", "Off|On",1);
> > > > lls = Param("Short Line Length",3,0,500,1)*10;
> > > > shf = Param("Shift Line Right",2,0,50,1);
> > > > rsc = ParamToggle("No Rescale","Off|On",1);
> > > > sty = ParamStyle("Style",4096);
> > > > optn= Param("Market Open",93000,00000,235959,000500);
> > > > cltn= Param("Market Close",161500,00000,235959,000500);
> > > > plsi= Param("Start Plotting",083000,00000,240000,000500);
> > > > plei= Param("End Plotting",161500,00000,240000,000500);
> > > > //===================
> > > > function tvy(tstart,tframe,array) {
> > > > if(array==1)y = ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
> > > > if(array==2)y = ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
> > > > y0=IIf(y>0,y,Null);
> > > > return y0; }
> > > > //======================
> > > > function xbar(tstart,tframe,array) {
> > > > if(array==1) {
> > > > y=ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
> > > > x=BarIndex()==ValueWhen(tframe AND H==y,bi);
> > > > x0=bc-LastValue(BarsSince(x>0),1); }
> > > > if(array==2) {
> > > > y=ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
> > > > x=bi==ValueWhen(tframe AND L==y,bi);
> > > > x0=bc-BarsSince(x>0); }
> > > > return x0; }
> > > > //==============
> > > > if(ipv=="All" OR ipv=="Calculate" OR ipv=="Lines" OR ipv=="Labels" OR
> > > > ipv=="OHLC" OR psh==1) {
> > > > pmtn = optn-010000; premkt = tn >= pmtn AND tn <= optn;
> > > > mk05 = optn+000500; tfrm05 = tn>=optn AND tn<= mk05;
> > > > mk15 = optn+001500; tfrm15 = tn>=optn AND tn<= mk15;
> > > > mk30 = optn+003000; tfrm30 = tn>=optn AND tn<= mk30;
> > > > mk45 = optn+004500; tfrm45 = tn>=optn AND tn<= mk45;
> > > > mk60 = optn+010000; tfrm60 = tn>=optn AND tn<= mk60;
> > > > mkss = 110000;
> > > > mkse = 133000; tfrslo = tn>=mkss AND tn<= mkse;
> > > > va30 = 154500; tfva30 = tn>=va30 AND tn<= cltn;
> > > > va2h = cltn-020000; tf2hrs = tn>=va2h AND tn<= cltn;
> > > > mktHrs = tn>=optn AND tn<= cltn;
> > > > pltval = tn>=plsi AND tn<= va2h;
> > > > //======================
> > > >
> > > > cyHi = HighestSince(bi==fbod,H);
> > > > cxHi = ValueWhen(tday AND H==cyHi,bi);
> > > > cyLo = LowestSince(bi==fbod,L);
> > > > cxLo = ValueWhen(tday AND L==cyLo,bi);
> > > > pyHi = ValueWhen(prdaz,HighestSince(bi==lbpd,H),1);
> > > > pxHi = ValueWhen(H==pyHi AND NOT tday ,bi);
> > > > pyLo = ValueWhen(prdaz,LowestSince(bi==lbpd,L),1);
> > > > pxLo = ValueWhen(L==pyLo AND NOT tday,bi);
> > > > mkOp = ValueWhen(Cross(tn,cltn),O,1);
> > > > xmOp = bc-BarsSince(Cross(tn,optn)>0);
> > > > mkCl = ValueWhen(Cross(TimeNum(),160000),C);
> > > > xmCL = bc-BarsSince(Cross(TimeNum(),160000)>0);
> > > > xpmk = bc-BarsSince(Cross(tn,optn)>0);
> > > > //======================
> > > > poHi=tvy(pmtn,premkt,1); poLo=tvy(pmtn,premkt,2);
> > > > mkHi=tvy(optn,mktHrs,1); mkLo=tvy(optn,mktHrs,2);
> > > > Hi05=tvy(optn,tfrm05,1); Lo05=tvy(optn,tfrm05,2);
> > > > Hi15=tvy(optn,tfrm15,1); Lo15=tvy(optn,tfrm15,2);
> > > > Hi30=tvy(optn,tfrm30,1); Lo30=tvy(optn,tfrm30,2);
> > > > Hi60=tvy(optn,tfrm60,1); Lo60=tvy(optn,tfrm60,2);
> > > > vH2h=tvy(va2h,tf2hrs,1); vL2h=tvy(va2h,tf2hrs,2);
> > > > vH30=tvy(va30,tfva30,1); vL30=tvy(va30,tfva30,2);
> > > > ACDos = (Hi15- Lo15) * 0.50;
> > > > ACDHi=Hi15+ACDos; ACDLo=Lo15-ACDos;
> > > > dRange = cyHi - cyLo;
> > > > mRange = mkHi - mkLo;
> > > > }
> > > > //===================
> > > > sty1=8|sty|rsc*2048; sty2=32|sty|rsc*2048;
> > > > tfplt = TimeNum()>=plsi AND TimeNum()<=plei;
> > > > if(ipv=="All" OR ipv=="Lines" OR ipv=="OHLC") {
> > > > hrplt(tfplt,mkOp,29,sty1,shf); hrplt(tfplt,mkCl,55,sty1,shf);
> > > > hrplt(tfplt,poHi,10,sty1,shf); hrplt(tfplt,poLo,10,sty1,shf);
> > > > hrplt(tfplt,mkHi,32,sty1,shf); hrplt(tfplt,mkLo,34,sty1,shf);
> > > > hrplt(tfplt,pyHi,25,sty1,shf); hrplt(tfplt,pyLo,51,sty1,shf);
> > > > }
> > > > if(ipv=="All" OR ipv=="Lines") {
> > > > hrplt(tfplt,Hi05,27,sty2,shf); hrplt(tfplt,Lo05,27,sty2,shf);
> > > > hrplt(tfplt,Hi15,42,sty2,shf); hrplt(tfplt,Lo15,42,sty2,shf);
> > > > hrplt(tfplt,Hi30,11,sty2,shf); hrplt(tfplt,Lo05,11,sty2,shf);
> > > > hrplt(tfplt,Hi60,36,sty2,shf); hrplt(tfplt,Lo60,36,sty2,shf);
> > > > hrplt(tfplt,vH2h,33,sty2,shf); hrplt(tfplt,vL2h,34,sty2,shf);
> > > > hrplt(tfplt,vH30,25,sty2,shf); hrplt(tfplt,vL30,51,sty2,shf);
> > > > hrplt(tfplt,ACDHi,42,sty1,shf); hrplt(tfplt,ACDLo,42,sty1,shf);
> > > > }
> > > > //===================
> > > > GfxSelectFont("Tahoma",10,400); GfxSetBkColor(16);
> > > > GfxSetOverlayMode(1); GfxSetBkMode(2);
> > > > xp=Min(tpX(htx+sbi),pxchartright-80); ha=-5;
> > > > if(ipv=="All" OR ipv=="Labels" OR ipv=="OHLC") {
> > > > gtx(vH2h,33,"vH2h",xp); gtx(vL2h,34,"vL2h",xp);
> > > > gtx(vH30,25,"vH30",xp); gtx(vL30,51,"vL30",xp);
> > > > gtx(mkOp,10,"mkOp",xp); gtx(mkCl,55,"mkCl",xp);
> > > > gtx(pyHi,25,"prHi",xp); gtx(pyLo,51,"prLo",xp);
> > > > }
> > > > if(ipv=="All" OR ipv=="Labels") {
> > > > gtx(poHi,10,"preH",xp); gtx(poLo,10,"PreL",xp);
> > > > gtx(mkHi,32,"mkHi",xp); gtx(mkLo,34,"mkLo",xp);
> > > > gtx(Hi05,27,"Hi05",xp); gtx(Lo05,27,"Lo05",xp);
> > > > gtx(Hi15,42,"Hi15",xp); gtx(Hi30,11,"Hi30",xp);
> > > > gtx(Lo30,11,"Lo30",xp); gtx(Hi60,36,"Hi60",xp);
> > gtx(Lo60,36,"Lo60",xp);
> > > > }
> > > > //===========================
> > > > up=shapeStar; dn=shapeStar; shp=shapeNone;
> > > > os=30;
> > > > //======================
> > > > if(psh==1) {
> > > > xoHi=xbar(pmtn,premkt,1); plshp(xoHi,poHi,dn,10, os);
> > > > xoLo=xbar(pmtn,premkt,2); plshp(xoLo,poLo,up,10,-os);
> > > > xmHi=xbar(optn,mktHrs,1); plshp(xmHi,mkHi,dn,32, os+10);
> > > > xmLo=xbar(optn,mktHrs,2); plshp(xmLo,mkLo,up,34,-os+10);
> > > > xH05=xbar(optn,tfrm05,1); plshp(xH05,Hi05,dn,51, os);
> > > > xL05=xbar(optn,tfrm05,2); plshp(xL05,Lo05,dn,34,-os);
> > > > xH15=xbar(optn,tfrm15,1); plshp(xH15,Hi15,up,42, os+15);
> > > > xL15=xbar(optn,tfrm15,2); plshp(xL15,Lo15,up,42,-os+15);
> > > > xH30=xbar(optn,tfrm30,1); plshp(xH30,Hi30,dn,11, os+10);
> > > > xL30=xbar(optn,tfrm30,2); plshp(xL30,Lo30,up,11,-os+10);
> > > > xH60=xbar(optn,tfrm60,1); plshp(xH60,Hi60,dn,36, os);
> > > > xL60=xbar(optn,tfrm60,2); plshp(xL60,Lo60,up,36,-os+15);
> > > > xvH2=xbar(va2h,tf2hrs,1); plshp(xvH2,vH2h,dn,34, os);
> > > > xvL2=xbar(va2h,tf2hrs,2); plshp(xvL2,vL2h,up,33,-os);
> > > > xvH3=xbar(va30,tfva30,1); plshp(xvH3,vH30,dn,43, os);
> > > > xvL3=xbar(va30,tfva30,2); plshp(xvL3,vL30,up,25,-os);
> > > > }
> > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > _SECTION_BEGIN("Market Markers");
> > > > //===============================
> > > > mkrs= ParamToggle("Plot Markers", "Off|On",0);
> > > > if(mkrs==1) {
> > > > VbarO = Cross(TimeNum(),optn);
> > > > VbarC = Cross(TimeNum(),cltn);
> > > > Plot(VbarO,"",10,2|32|styleOwnScale|4096|4);
> > > > Plot(VbarC,"",55,2|32|styleOwnScale|4096|4);
> > > > }
> > > > _SECTION_END();
> > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > Title = EncodeColor(55)+ Title = Name() + " " + EncodeColor(32) +
> > > > Date() + " " + EncodeColor(5) + "{{INTERVAL}} " +
> > > > //Title = EncodeColor(55)+ Date() + " Tick = " + EncodeColor(5) +
> > > > Interval()+
> > > > EncodeColor(55)+ " Open = "+ EncodeColor(52)+ WriteVal(O,dec) +
> > > > EncodeColor(55)+ " High = "+ EncodeColor(5) + WriteVal(H,dec) +
> > > > EncodeColor(55)+ " Low = "+ EncodeColor(32)+ WriteVal(L,dec) +
> > > > EncodeColor(55)+ " Close = "+ EncodeColor(52)+ WriteVal(C,dec) +
> > > > EncodeColor(55)+ " Volume = "+EncodeColor(52)+ WriteVal(V,1.0) +
> > > > EncodeColor(55)+ " bi= "+EncodeColor(42)+ WriteVal(sbi,1) +
> > > > EncodeColor(55)+ " Bar to End = "+ EncodeColor(10)+
> > WriteVal(Lbi-sbi,1.0);
> > > >
> > > > --- In amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > <mailto:amibroker%40yahoogroups.com>,
> > > > reinsley <reinsley@> wrote:
> > > > >
> > > > >
> > > > > Woozi,
> > > > >
> > > > > The initial plot is ok. As soon as I modify param "Plot Shapes" to
> > > > ON, I
> > > > > get errors.
> > > > >
> > > > > I hope my screen captures are published...
> > > > >
> > > > > Best regards
> > > > >
> > > > > wooziwog a écrit :
> > > > > >
> > > > > >
> > > > > > Hi Reinsley,
> > > > > >
> > > > > > I see your post "Many variables not initialized" but don't
> > understand
> > > > > > what arrays / values your are referring to.
> > > > > > I would appreciate additional details.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > David K.
> > > > > >
> > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>,
> > > > > > reinsley <reinsley@> wrote:
> > > > > > >
> > > > > > >
> > > > > > > Woozi, Thanks for sharing
> > > > > > >
> > > > > > > Many variables not initialized...
> > > > > > >
> > > > > > > Best regards
> > > > > > >
> > > > > > >
> > > > > > > wooziwog a écrit :
> > > > > > > >
> > > > > > > >
> > > > > > > > Tim,
> > > > > > > >
> > > > > > > > The following uses AB functions for plotting intraday pivots.
> > > > > > > > You can modify it to suit your needs.
> > > > > > > > I am using version 5.2.9.2. If you have any problems with it
> > > > check for
> > > > > > > > line wrapping, I copied it from my intraday chart and
> > tested it.
> > > > > > > >
> > > > > > > > David K.
> > > > > > > >
> > > > > > > > //======================
> > > > > > > > _SECTION_BEGIN("Chart Settings");
> > > > > > > > //======================
> > > > > > > > SetChartOptions(0, chartShowDates);
> > > > > > > > SetChartBkColor(1);
> > > > > > > > GraphXSpace=Param("GraphXSpace",15,0,300,1);
> > > > > > > > dec= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
> > > > > > > > bc = BarCount-1;
> > > > > > > > bi = BarIndex();
> > > > > > > > Lbi = LastValue(bi);
> > > > > > > > sbi = SelectedValue(BarIndex());
> > > > > > > > tn = TimeNum();
> > > > > > > > Plot(C,"",IIf(C>O,34,IIf(C<O,32,55)),128,4);
> > > > > > > > //======================
> > > > > > > > pxchartright = Status("pxChartRight");//returns
> > y-coordinate of
> > > > > > top-left
> > > > > > > > corner
> > > > > > > > //======================
> > > > > > > > _SECTION_BEGIN("GFX X Conversion");
> > > > > > > > function tpX(bar) {
> > > > > > > > lvb = Status("LastVisibleBar");
> > > > > > > > fvb = Status("FirstVisibleBar");
> > > > > > > > pxchartleft = Status("pxChartLeft");
> > > > > > > > pxchartright = Status("pxChartRight");
> > > > > > > > pxheight = Status("pxheight");
> > > > > > > > pxchartwidth = Status("pxChartWidth");
> > > > > > > > return pxchartleft+(bar-fvb)*pxchartwidth/(Lvb-fvb+1); }
> > > > > > > > _SECTION_END();
> > > > > > > > //======================
> > > > > > > > _SECTION_BEGIN("GFX Y Conversion");
> > > > > > > > function tPY(Value) {
> > > > > > > > local Miny, Maxy, pxchartbottom, pxchartheight;
> > > > > > > > Miny = Status("AxisMiny");
> > > > > > > > Maxy = Status("AxisMaxy");
> > > > > > > > pxchartbottom = Status("pxChartBottom");
> > > > > > > > pxchartheight = Status("pxChartHeight");
> > > > > > > > return pxchartbottom - floor(0.5
> > > > > > +(Value-Miny)*pxchartheight/(Maxy-Miny)); }
> > > > > > > > _SECTION_END();
> > > > > > > > //======================
> > > > > > > > _SECTION_BEGIN("GFX Text+Label, GFX Y, Std X");
> > > > > > > > //======================
> > > > > > > > dec=0; ha=0;
> > > > > > > > procedure gtx(val,color,string,xpos) {
> > > > > > > > GfxSetTextColor(color);
> > > > > > > > gtext=GfxDrawText(NumToStr(val,dec)+"-"+
> > > > > > > > StrExtract(string,0)+"
> > ",xpos,tpY(SelectedValue(val))+ha,0,0,256);
> > > > > > > > return gtext; }
> > > > > > > > _SECTION_END();
> > > > > > > > //======================
> > > > > > > > _SECTION_BEGIN("Plot Shapes");
> > > > > > > > //======================
> > > > > > > > procedure plshp(x,y,shape,color,shift)
> > > > > > > > { PlotShapes(IIf(BarIndex()==x,shape,0),color,0,y,shift); }
> > > > > > > > //======================
> > > > > > > > lls=0; sln=0;
> > > > > > > > procedure hrplt(tf,value,color,sty,shf) {
> > > > > > > > Lin=LineArray(Lbi-lls-shf,LastValue(value),
> > > > > > > > Lbi+shf,LastValue(value),1);
> > > > > > > > Plot(IIf(tf AND sln==0,value,Null),"",color,sty,0,0,shf);
> > > > > > > > Plot(IIf(sln==1,Lin,Null),"",color,sty,0,0,shf); }
> > > > > > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > > > _SECTION_BEGIN("Intraday Time Pivots");
> > > > > > > > //===============================
> > > > > > > > ipv = ParamList("Sup Res
> > > > > > Pivots","Off|All|Calculate||OHLC|Lines|Labels",3);
> > > > > > > > psh= ParamToggle("Plot Shapes", "Off|On",0);
> > > > > > > > htx = Param("Text Shift",18,-200,150,1);
> > > > > > > > sln= ParamToggle("Short Lines", "Off|On",1);
> > > > > > > > lls = Param("Short Line Length",3,0,500,1)*10;
> > > > > > > > shf = Param("Shift Line Right",2,0,50,1);
> > > > > > > > rsc = ParamToggle("No Rescale","Off|On",1);
> > > > > > > > sty = ParamStyle("Style",4096);
> > > > > > > > optn= Param("Market Open",93000,00000,235959,000500);
> > > > > > > > cltn= Param("Market Close",161500,00000,235959,000500);
> > > > > > > > plsi= Param("Start Plotting",083000,00000,240000,000500);
> > > > > > > > plei= Param("End Plotting",161500,00000,240000,000500);
> > > > > > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > > > //Time and Dates
> > > > > > > > begD = DateNum() != Ref(DateNum(),-1);//Begin New Day
> > > > > > > > fboD = LastValue(ValueWhen(begD,bi,1));//First Bar of Day
> > > > > > > > endD = DateNum() != Ref(DateNum(), 1);//End of Day
> > > > > > > > lboD = LastValue(ValueWhen(endD,bi,1));//Last Bar of Day
> > > > > > > > lbpd = LastValue(ValueWhen(begD,bi,2)-1);//Last Bar of
> > > > Previous Day
> > > > > > > > tday = DateNum()==LastValue(DateNum(),1);//Includes current
> > > > fbod to
> > > > > > > > future lbod
> > > > > > > > pdaz= ValueWhen(begD,Ref(DateNum(),-1),1);//All bars prior to
> > > > > > existing lbod
> > > > > > > > prdaz=pdaz AND NOT tday;
> > > > > > > > notda= NOT tday;
> > > > > > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > > > function tvy(tstart,tframe,array) {
> > > > > > > > if(array==1)y =
> > > > ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
> > > > > > > > if(array==2)y =
> > > > ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
> > > > > > > > y0=IIf(y>0,y,Null);
> > > > > > > > return y0; }
> > > > > > > > //======================
> > > > > > > > function xbar(tstart,tframe,array) {
> > > > > > > > if(array==1) {
> > > > > > > > y=ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
> > > > > > > > x=BarIndex()==ValueWhen(tframe AND H==y,bi);
> > > > > > > > x0=bc-LastValue(BarsSince(x>0),1); }
> > > > > > > > if(array==2) {
> > > > > > > > y=ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
> > > > > > > > x=bi==ValueWhen(tframe AND L==y,bi);
> > > > > > > > x0=bc-BarsSince(x>0); }
> > > > > > > > return x0; }
> > > > > > > > //==============
> > > > > > > > if(ipv=="All" OR ipv=="Calculate" OR ipv=="Lines" OR
> > > > ipv=="Labels" OR
> > > > > > > > ipv=="OHLC") {
> > > > > > > > pmtn = optn-010000; premkt = tn >= pmtn AND tn <= optn;
> > > > > > > > mk05 = optn+000500; tfrm05 = tn>=optn AND tn<= mk05;
> > > > > > > > mk15 = optn+001500; tfrm15 = tn>=optn AND tn<= mk15;
> > > > > > > > mk30 = optn+003000; tfrm30 = tn>=optn AND tn<= mk30;
> > > > > > > > mk45 = optn+004500; tfrm45 = tn>=optn AND tn<= mk45;
> > > > > > > > mk60 = optn+010000; tfrm60 = tn>=optn AND tn<= mk60;
> > > > > > > > mkss = 110000;
> > > > > > > > mkse = 133000; tfrslo = tn>=mkss AND tn<= mkse;
> > > > > > > > va30 = 154500; tfva30 = tn>=va30 AND tn<= cltn;
> > > > > > > > va2h = cltn-020000; tf2hrs = tn>=va2h AND tn<= cltn;
> > > > > > > > mktHrs = tn>=optn AND tn<= cltn;
> > > > > > > > pltval = tn>=plsi AND tn<= va2h;
> > > > > > > > //======================
> > > > > > > >
> > > > > > > > cyHi = HighestSince(bi==fbod,H);
> > > > > > > > cxHi = ValueWhen(tday AND H==cyHi,bi);
> > > > > > > > cyLo = LowestSince(bi==fbod,L);
> > > > > > > > cxLo = ValueWhen(tday AND L==cyLo,bi);
> > > > > > > > pyHi = ValueWhen(prdaz,HighestSince(bi==lbpd,H),1);
> > > > > > > > pxHi = ValueWhen(H==pyHi AND NOT tday ,bi);
> > > > > > > > pyLo = ValueWhen(prdaz,LowestSince(bi==lbpd,L),1);
> > > > > > > > pxLo = ValueWhen(L==pyLo AND NOT tday,bi);
> > > > > > > > mkOp = ValueWhen(Cross(tn,cltn),O,1);
> > > > > > > > xmOp = bc-BarsSince(Cross(tn,optn)>0);
> > > > > > > > mkCl = ValueWhen(Cross(TimeNum(),160000),C);
> > > > > > > > xmCL = bc-BarsSince(Cross(TimeNum(),160000)>0);
> > > > > > > > xpmk = bc-BarsSince(Cross(tn,optn)>0);
> > > > > > > > //======================
> > > > > > > > poHi=tvy(pmtn,premkt,1); poLo=tvy(pmtn,premkt,2);
> > > > > > > > mkHi=tvy(optn,mktHrs,1); mkLo=tvy(optn,mktHrs,2);
> > > > > > > > Hi05=tvy(optn,tfrm05,1); Lo05=tvy(optn,tfrm05,2);
> > > > > > > > Hi15=tvy(optn,tfrm15,1); Lo15=tvy(optn,tfrm15,2);
> > > > > > > > Hi30=tvy(optn,tfrm30,1); Lo30=tvy(optn,tfrm30,2);
> > > > > > > > Hi60=tvy(optn,tfrm60,1); Lo60=tvy(optn,tfrm60,2);
> > > > > > > > vH2h=tvy(va2h,tf2hrs,1); vL2h=tvy(va2h,tf2hrs,2);
> > > > > > > > vH30=tvy(va30,tfva30,1); vL30=tvy(va30,tfva30,2);
> > > > > > > > ACDos = (Hi15- Lo15) * 0.50;
> > > > > > > > ACDHi=Hi15+ACDos; ACDLo=Lo15-ACDos;
> > > > > > > > dRange = cyHi - cyLo;
> > > > > > > > mRange = mkHi - mkLo;
> > > > > > > > }
> > > > > > > > //===================
> > > > > > > > sty1=8|sty|rsc*2048; sty2=32|sty|rsc*2048;
> > > > > > > > tfplt = TimeNum()>=plsi AND TimeNum()<=plei;
> > > > > > > > if(ipv=="All" OR ipv=="Lines" OR ipv=="OHLC") {
> > > > > > > > hrplt(tfplt,mkOp,29,sty1,shf); hrplt(tfplt,mkCl,55,sty1,shf);
> > > > > > > > hrplt(tfplt,poHi,10,sty1,shf); hrplt(tfplt,poLo,10,sty1,shf);
> > > > > > > > hrplt(tfplt,mkHi,32,sty1,shf); hrplt(tfplt,mkLo,34,sty1,shf);
> > > > > > > > hrplt(tfplt,pyHi,25,sty1,shf); hrplt(tfplt,pyLo,51,sty1,shf);
> > > > > > > > }
> > > > > > > > if(ipv=="All" OR ipv=="Lines") {
> > > > > > > > hrplt(tfplt,Hi05,27,sty2,shf); hrplt(tfplt,Lo05,27,sty2,shf);
> > > > > > > > hrplt(tfplt,Hi15,42,sty2,shf); hrplt(tfplt,Lo15,42,sty2,shf);
> > > > > > > > hrplt(tfplt,Hi30,11,sty2,shf); hrplt(tfplt,Lo05,11,sty2,shf);
> > > > > > > > hrplt(tfplt,Hi60,36,sty2,shf); hrplt(tfplt,Lo60,36,sty2,shf);
> > > > > > > > hrplt(tfplt,vH2h,33,sty2,shf); hrplt(tfplt,vL2h,34,sty2,shf);
> > > > > > > > hrplt(tfplt,vH30,25,sty2,shf); hrplt(tfplt,vL30,51,sty2,shf);
> > > > > > > > hrplt(tfplt,ACDHi,42,sty1,shf);
> > hrplt(tfplt,ACDLo,42,sty1,shf);
> > > > > > > > }
> > > > > > > > //===================
> > > > > > > > GfxSelectFont("Tahoma",10,400); GfxSetBkColor(16);
> > > > > > GfxSetOverlayMode(1);
> > > > > > > > GfxSetBkMode(2);
> > > > > > > > xp=Min(tpX(htx+sbi),pxchartright-80); ha=-5;
> > > > > > > > if(ipv=="All" OR ipv=="Labels" OR ipv=="OHLC") {
> > > > > > > > gtx(vH2h,33,"vH2h",xp); gtx(vL2h,34,"vL2h",xp);
> > > > > > gtx(vH30,25,"vH30",xp);
> > > > > > > > gtx(vL30,51,"vL30",xp);
> > > > > > > > gtx(mkOp,10,"mkOp",xp); gtx(mkCl,55,"mkCl",xp);
> > > > > > gtx(pyHi,25,"prHi",xp);
> > > > > > > > gtx(pyLo,51,"prLo",xp);
> > > > > > > > }
> > > > > > > > if(ipv=="All" OR ipv=="Labels") {
> > > > > > > > gtx(poHi,10,"preH",xp); gtx(poLo,10,"PreL",xp);
> > > > > > gtx(mkHi,32,"mkHi",xp);
> > > > > > > > gtx(mkLo,34,"mkLo",xp);
> > > > > > > > gtx(Hi05,27,"Hi05",xp); gtx(Lo05,27,"Lo05",xp);
> > > > > > gtx(Hi15,42,"Hi15",xp);
> > > > > > > > gtx(Hi30,11,"Hi30",xp);
> > > > > > > > gtx(Lo30,11,"Lo30",xp); gtx(Hi60,36,"Hi60",xp);
> > > > gtx(Lo60,36,"Lo60",xp);
> > > > > > > > }
> > > > > > > > //===========================
> > > > > > > > up=shapeStar; dn=shapeStar; shp=shapeNone;
> > > > > > > > os=30;
> > > > > > > > //======================
> > > > > > > > if(psh==1) {
> > > > > > > > xoHi=xbar(pmtn,premkt,1); plshp(xoHi,preH,dn,10, os);
> > > > > > > > xoLo=xbar(pmtn,premkt,2); plshp(xoLo,preL,up,10,-os);
> > > > > > > > xmHi=xbar(optn,mktHrs,1); plshp(xmHi,mkHi,dn,32, os+10);
> > > > > > > > xmLo=xbar(optn,mktHrs,2); plshp(xmLo,mkLo,up,34,-os+10);
> > > > > > > > xH05=xbar(optn,tfrm05,1); plshp(xH05,Hi05,dn,51, os);
> > > > > > > > xL05=xbar(optn,tfrm05,2); plshp(xL05,Lo05,dn,34,-os);
> > > > > > > > xH15=xbar(optn,tfrm15,1); plshp(xH15,Hi15,up,42, os+15);
> > > > > > > > xL15=xbar(optn,tfrm15,2); plshp(xL15,Lo15,up,42,-os+15);
> > > > > > > > xH30=xbar(optn,tfrm30,1); plshp(xH30,Hi30,dn,11, os+10);
> > > > > > > > xL30=xbar(optn,tfrm30,2); plshp(xL30,Lo30,up,11,-os+10);
> > > > > > > > xH60=xbar(optn,tfrm60,1); plshp(xH60,Hi60,dn,36, os);
> > > > > > > > xL60=xbar(optn,tfrm60,2); plshp(xL60,Lo60,up,36,-os);
> > > > > > > > xvH2=xbar(va2h,tf2hrs,1); plshp(xvH2,vH2h,dn,34, os);
> > > > > > > > xvL2=xbar(va2h,tf2hrs,2); plshp(xvL2,vL2h,up,33,-os);
> > > > > > > > xvH3=xbar(va30,tfva30,1); plshp(xvH3,vH30,dn,43, os);
> > > > > > > > xvL3=xbar(va30,tfva30,2); plshp(xvL3,vL30,up,25,-os);
> > > > > > > > }
> > > > > > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > > > _SECTION_BEGIN("Market Markers");
> > > > > > > > //===============================
> > > > > > > > mkrs= ParamToggle("Plot Markers", "Off|On",0);
> > > > > > > > if(mkrs==1) {
> > > > > > > > VbarO = Cross(TimeNum(),optn);
> > > > > > > > VbarC = Cross(TimeNum(),cltn);
> > > > > > > > Plot(VbarO,"",10,2|32|styleOwnScale|4096|4);
> > > > > > > > Plot(VbarC,"",55,2|32|styleOwnScale|4096|4);
> > > > > > > > }
> > > > > > > > _SECTION_END();
> > > > > > > > //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > > > > > > Title = EncodeColor(55)+ Title = Name() + " " +
> > EncodeColor(32) +
> > > > > > Date()
> > > > > > > > + " " + EncodeColor(5) + "{{INTERVAL}} " +
> > > > > > > > //Title = EncodeColor(55)+ Date() + " Tick = " +
> > EncodeColor(5) +
> > > > > > > > Interval()+
> > > > > > > > EncodeColor(55)+ " Open = "+ EncodeColor(52)+
> > WriteVal(O,dec) +
> > > > > > > > EncodeColor(55)+ " High = "+ EncodeColor(5) +
> > WriteVal(H,dec) +
> > > > > > > > EncodeColor(55)+ " Low = "+ EncodeColor(32)+ WriteVal(L,dec) +
> > > > > > > > EncodeColor(55)+ " Close = "+ EncodeColor(52)+
> > WriteVal(C,dec) +
> > > > > > > > EncodeColor(55)+ " Volume = "+EncodeColor(52)+
> > WriteVal(V,1.0) +
> > > > > > > > EncodeColor(55)+ " bi= "+EncodeColor(42)+ WriteVal(sbi,1) +
> > > > > > > > EncodeColor(55)+ " Bar to End = "+ EncodeColor(10)+
> > > > > > WriteVal(Lbi-sbi,1.0);
> > > > > > > >
> > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>,
> > > > > > > > "Tim" <timkthung@> wrote:
> > > > > > > > >
> > > > > > > > > Thanks de again. Let me try to figure out something.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > From: de_techneut
> > > > > > > > > Sent: Friday, December 04, 2009 6:50 AM
> > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > > > > Subject: [amibroker] Re: SUPER PIVOT POINTS
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Hi Tim, I am also just getting to know Amibroker and AFL,
> > > > the .dll
> > > > > > > > was not written by me. I would like to ask more experienced
> > > > users to
> > > > > > > > help a hand here. I can tell you the logic in the code but
> > > > > > implementing
> > > > > > > > it and getting nothing but green (no errors ) is a bridge
> > to far
> > > > > > for me
> > > > > > > > now. the logic to be used could be : determine the highest
> > > > high of a
> > > > > > > > period the lowest low and the close. calculate your pivots
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > use deFlagTimeRange( starttime, endtime) to mark your
> > market
> > > > open
> > > > > > and
> > > > > > > > you market close
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > then something like
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > openmarket=deFlagTimeRange( starttime, endtime);
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > highofmarket=null;//initialisation
> > > > > > > > > lowofmarket=null;//initialisation
> > > > > > > > > if (openmarket)
> > > > > > > > > {
> > > > > > > > > highofmarket=iif(h>highofmarket,h,highofmarket);
> > > > > > > > > lowofmarket=iif(l<lowofmarket,l,lowofmarket);
> > > > > > > > > marketpivot= (highofmarket+ lowofmarket+c)/3;
> > > > > > > > > suport1=(marketpivot*2)-highofmarket;
> > > > > > > > > resistance1=(marketpivot*2)-lowofmarket;
> > > > > > > > > /* and so on */
> > > > > > > > > }
> > > > > > > > > this is just of the top of my head, i haven't tested this
> > > > code ( i
> > > > > > > > doubt it works but maybe you get the idea and can take it
> > further.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Kind regards
> > > > > > > > > Marc
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > > > <mailto:amibroker%40yahoogroups.com>, "Tim" <timkthung@>
> > wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Thanks de. I had downloaded it. Would you please show me
> > > > how to
> > > > > > use
> > > > > > > > it.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > From: de_techneut
> > > > > > > > > > Sent: Thursday, December 03, 2009 11:29 PM
> > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > > > > > Subject: [amibroker] Re: SUPER PIVOT POINTS
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Hi Tim, it is possible to do that with the use of a
> > plugin
> > > > called
> > > > > > > > deDATETIME. it has functions which enables you to define your
> > > > own time
> > > > > > > > interval hope this helps. Marc
> > > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
> > <mailto:amibroker%40yahoogroups.com>
> > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > <mailto:amibroker%40yahoogroups.com>
> > > > > > > > <mailto:amibroker%40yahoogroups.com>, "Tim" timkthung@ wrote:
> > > > > > > > > > >
> > > > > > > > > > > Hello everybody,
> > > > > > > > > > > Would anyone please tell me whether we could define the
> > > > cutting
> > > > > > > > time in calculating the daily pivots for the next day.
> > > > > > > > > > > I raise this issue because of my time-zone
> > difference from
> > > > > > the NY
> > > > > > > > stock exchange.
> > > > > > > > > > > Much appreciate if anyone could help.
> > > > > > > > > > >
> > > > > > > > > > > Tim
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
> >
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
amibroker-digest@xxxxxxxxxxxxxxx
amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|