|
PureBytes Links
Trading Reference Links
|
thanks, will look at it in more detail over the weekend. Just know that
troughbars and peakbars function use the zig function and you may be already
be minutes into a new trend before you find out that the zig will show a new
bottom/top in the chart. I worked out Eric Tangens code into a system but
find it works as bad as a simple MA system. Before you find out you are in a
new trend on average it will not give you a good entry.
However I can imagine that using the support and resistance levels where
they are valid might work better.
regards, Ed
----- Original Message -----
From: "reinsley" <reinsley@xxxxxxxx>
To: <amibroker@xxxxxxxxxxxxxxx>
Sent: Friday, December 04, 2009 1:25 PM
Subject: Re: [amibroker] Re: SUPER PIVOT POINTS
Hi Ed,
As soon as two automatic pivots are detected, the formula does not look
into the future.
I manually draw some additionnal S & R onto RSIc and I can see that the
future price find invisible S & R perfectly sync with the Tsokakis's RSI.
I did not test it on historical, just in real time. The results are
astonishing on FCE and FDAX.
I have manually added the corresponding S & R on the price. I mean the
pivots found by RSIc are translated onto the price. They are pretty good.
I post a mod that plots stars onto the RSIc pivots, to check the position.
The caveat with stars is : if the first candle is pivot, a star is not
drawn. If you see one star, the first RSIc candle is a pivot.
I will be very pleased to have comments about this indicator applied on
other futures.
Is the professionnal market driven by RSI ? It's seem so...
Best regards
// The RSIc trendlines cac
// courtesy by Dimitri Tsokakis
// "Stars pivot" // The RSIc trendlines cac
// courtesy by Dimitri Tsokakis
// "Stars pivot" mod
procedure RSIc( n )
{
C = RSIa( C, n );
O = RSIa( O, n );
H = RSIa( H, n );
H = IIf( H < Max( C, O ), Max( C, O ), H );
L = RSIa( L, n );
L = IIf( L > Min( C, O ), Min( C, O ), L );
}
n = Param( "n", 10, 10, 30, 5 );//RSI sensitivity
RSIc( n );
Plot( C, "RSIc", 1, 64 );
per = Param( "per", 10, 3, 20, 1 );//trendlines sensitivity
x = Cum( 1 );
s1 = L;
s11 = H;
pS = TroughBars( s1, per, 1 ) == 0;
endt = LastValue( ValueWhen( pS, x, 1 ) );
startt = LastValue( ValueWhen( pS, x, 2 ) );
dtS = endt - startt;
endS = LastValue( ValueWhen( pS, s1, 1 ) );
startS = LastValue( ValueWhen( pS, s1, 2 ) );
aS = ( endS - startS ) / dtS;
bS = endS;
trendlineS = aS * ( x - endt ) + bS;
Plot( IIf( x > startt - 10, trendlineS, -1e10 ), "", colorYellow, 1 );
PlotText( " *", endt - 1 , endS - 10, colorGreen );// last point 1 support
PlotText( " *", startt - 1 , startS - 10, colorGreen );// first point 2
support
pR = PeakBars( s11, per, 1 ) == 0;
endt1 = LastValue( ValueWhen( pR, x, 1 ) );
startt1 = LastValue( ValueWhen( pR, x, 2 ) );
firstt1 = LastValue( ValueWhen( pR, x, 3 ) );
dtR = endt1 - startt1;
endR = LastValue( ValueWhen( pR, s11, 1 ) );
startR = LastValue( ValueWhen( pR, s11, 2 ) );
aR = ( endR - startR ) / dtR;
bR = endR;
trendlineR = aR * ( x - endt1 ) + bR;
Plot( IIf( x > startT1 - 10, trendlineR, -1e10 ), "", colorYellow, 1 );
PlotText( " *", endt1 -1 , endR + 5, colorRed );// last point 1 resistance
PlotText( " *", startt1 -1 , startR + 5, colorRed );// first point 2
resistance
// newday bar
segments = IIf( Interval() < inDaily, Day(), Month() );
segments = segments != Ref( segments , -1 );
Plot( segments, "", colorDarkBlue, styleHistogram | styleOwnScale |
styleDashed | styleNoLabel );
procedure RSIc( n )
{
C = RSIa( C, n );
O = RSIa( O, n );
H = RSIa( H, n );
H = IIf( H < Max( C, O ), Max( C, O ), H );
L = RSIa( L, n );
L = IIf( L > Min( C, O ), Min( C, O ), L );
}
n = Param( "n", 10, 10, 30, 5 );//RSI sensitivity
RSIc( n );
Plot( C, "RSIc", 1, 64 );
per = Param( "per", 10, 3, 20, 1 );//trendlines sensitivity
x = Cum( 1 );
s1 = L;
s11 = H;
pS = TroughBars( s1, per, 1 ) == 0;
endt = LastValue( ValueWhen( pS, x, 1 ) );
startt = LastValue( ValueWhen( pS, x, 2 ) );
dtS = endt - startt;
endS = LastValue( ValueWhen( pS, s1, 1 ) );
startS = LastValue( ValueWhen( pS, s1, 2 ) );
aS = ( endS - startS ) / dtS;
bS = endS;
trendlineS = aS * ( x - endt ) + bS;
Plot( IIf( x > startt - 10, trendlineS, -1e10 ), "", colorYellow, 1 );
PlotText( " *", endt - 1 , endS - 10, colorGreen );// last point 1 support
PlotText( " *", startt - 1 , startS - 10, colorGreen );// first point 2
support
pR = PeakBars( s11, per, 1 ) == 0;
endt1 = LastValue( ValueWhen( pR, x, 1 ) );
startt1 = LastValue( ValueWhen( pR, x, 2 ) );
firstt1 = LastValue( ValueWhen( pR, x, 3 ) );
dtR = endt1 - startt1;
endR = LastValue( ValueWhen( pR, s11, 1 ) );
startR = LastValue( ValueWhen( pR, s11, 2 ) );
aR = ( endR - startR ) / dtR;
bR = endR;
trendlineR = aR * ( x - endt1 ) + bR;
Plot( IIf( x > startT1 - 10, trendlineR, -1e10 ), "", colorYellow, 1 );
PlotText( " *", endt1 -1 , endR + 5, colorRed );// last point 1 resistance
PlotText( " *", startt1 -1 , startR + 5, colorRed );// first point 2
resistance
axismin = Status("axisminy");
axismax = Status("axismaxy");
// newday bar
segments = IIf( Interval() < inDaily, Day(), Month() );
segments = segments != Ref( segments , -1 );
Plot( segments, "", colorDarkBlue, styleHistogram | styleOwnScale |
styleDashed | styleNoLabel );
Edward Pottasch a écrit :
> hi,
>
> I like to note that this code of Tsokakis uses future quotes. I recognised
> the code because recently I have seen a post on the Indi boards apparently
> using the code of tsokakis,
>
> this code is posted here:
>
> http://www.traderji.com/advanced-trading-strategies/35128-advanced-support-resistence-trendlines-afl.html
>
> want to dig deeper into it myself how one could best use such code for
> trading but looking at historical charts is deceiving since in real time
> charts may all of a sudden change the support and resistance levels and
> buy
> and sell signals may suddenly disappear, because the code uses future
> quotes. To use it safely you need to build in ideas posted by Eric Tangen
> in
> the Ami-library.
>
> rgds, Ed
>
>
>
> ----- Original Message -----
> From: "reinsley" <reinsley@xxxxxxxx>
> To: <amibroker@xxxxxxxxxxxxxxx>
> Sent: Friday, December 04, 2009 12:03 PM
> Subject: Re: [amibroker] Re: SUPER PIVOT POINTS
>
>
>
>
> Tim,
>
> I have got this formula in my archives, close from the wiki.
>
> IMHO, you should have a look to S&R RSIc I posted two days ago.
>
> http://finance.groups.yahoo.com/group/amibroker/message/144492
>
>
> Best regards
>
> // Robert's Pivot Points
>
> SetChartOptions( 0, chartShowArrows | chartShowDates );
>
> _SECTION_BEGIN( "Price" );
> //_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} \nOp %g, \nHi
> %g, \nLo %g, \nCl %g (%.1f%%) {{VALUES}}", O, H, L, C, SelectedValue(
> ROC( C, 1 ) ) ));
> Plot( C, "Close", ParamColor( "Color", colorBlack ), styleNoTitle |
> styleCandle | styleThick );
> _SECTION_END();
>
> _SECTION_BEGIN("Pivot Points Robert's");
>
> //---------------------------------------------------------------------------
> // Pivot Pointer
> //---------------------------------------------------------------------------
> // Now a days each and every trader wants pivot levels for thier day
> // trading.But the main feature in this afl is you can get all types of
> // pivot point in a single afl, Some of the traders use Woodie pivot,
> // caramilla pivot, Fibonacci pivot and most of them used Classical
> // pivot, i think this afl will solve all your needs.
> //---------------------------------------------------------------------------
>
> //---------------------------------------------------------------------------
> // Please write your comments to arokiaraj_robert@xxxxxxxxx
> //---------------------------------------------------------------------------
>
> //---------------------------------------------------------------------------
> // This section gets whether they want pivot level for intraday or thier
> eod
> //---------------------------------------------------------------------------
>
> _N(ioreod =ParamList("Pivot Levels for ", "Intraday|EOD"));
>
> if (ioreod=="Intraday")
> {
> yh = TimeFrameGetPrice( "H", inDaily, -1 );
> yl = TimeFrameGetPrice( "L", inDaily, -1 );
> yc = TimeFrameGetPrice( "C", inDaily, -1 );
> }
> else
> {
> yh = TimeFrameGetPrice( "H", inDaily, 0 );
> yl = TimeFrameGetPrice( "L", inDaily, 0 );
> yc = TimeFrameGetPrice( "C", inDaily, 0 );
> }
>
> //---------------------------------------------------------------------------
> // To calculate the Pivot Levels
> //---------------------------------------------------------------------------
>
> to = TimeFrameGetPrice( "O", inDaily, 0 );
> pivot = (yh + yl + yc) / 3;
> range = yh - yl;
> _N(pist =ParamList("Select Pivot Type ", "Classical Pivot|Woodie
> Pivot|Caramilla Pivot|Fibonacci Pivot"));
>
> if (pist =="Classical Pivot" )
> {
> r1 = (2 * pivot) - yl ;
> s1 = (2 * pivot) - yh ;
> r2 = pivot - s1 + r1;
> s2 = pivot - (r1 - s1) ;
> r3 = 2 * (pivot - yl) + yh ;
> s3 = yl - (2 * (yh - pivot));
> }
>
> else if(pist =="Woodie Pivot" )
> {
> pivot = (yh + yl + yc + to) / 4;
> r1 = (2 * pivot) - yl;
> r2 = pivot + range;
> r3 = yh + 2 * (pivot - yl);
> r4 = r3 + range;
> s1 = (2 * pivot) - yh;
> s2 = pivot - range;
> s3 = yl - 2 * (yh - pivot);
> s4 = S3 - range;
> }
>
> else if(pist =="Caramilla Pivot" )
> {
> r4 = yc + range * 1.1/2;
> r3 = yc + range * 1.1/4;
> r2 = yc + range * 1.1/6;
> r1 = yc + range * 1.1/12;
> s1 = yc - range * 1.1/12;
> s2 = yc - range * 1.1/6;
> s3 = yc - range * 1.1/4;
> s4 = yc - range * 1.1/2;
> }
>
> else
> {
> r3 = pivot + 1.000 * (yh - yl);
> r2 = pivot + 0.618 * (yh - yl);
> r1 = pivot + 0.382 * (yh - yl);
> s1 = pivot - 0.382 * (yh - yl);
> s2 = pivot - 0.618 * (yh - yl);
> s3 = pivot - 1.000 * (yh - yl);
> }
>
> //---------------------------------------------------------------------------
> // To Plot Pivot Levels in the screen
> //---------------------------------------------------------------------------
>
> _N(dsr =ParamList("Draw Intraday Pivot Levels ",
> "None|Both|Support|Resistance"));
>
> if (dsr =="Support" OR dsr == "Both")
> {
> Plot(pivot, "\n Pivot - ",colorGreen,1);
> Plot(r1, "Resistance 1 - ",colorDarkRed,1);
> Plot(r2, "Resistance 2 - ",colorDarkRed,1);
> Plot(r3, "Resistance 3 - ",colorDarkRed,1);
> Plot((pivot+r1)/2, "Mid Value of R1 & Pivot ",colorLightBlue,1);
> Plot((r3+r2)/2, "Mid Value of R2 & R3 - ",colorLightBlue,1);
> Plot((r1+r2)/2, "Mid Value of R1 & R2 - ",colorLightBlue,1);
> }
>
> if( dsr == "Resistance" OR dsr == "Both")
> {
> Plot(pivot, "\n Pivot - ",colorGreen,1);
> Plot(s3, "Support 2 - ",colorDarkGreen,1);
> Plot(s2, "Support 2 - ",colorDarkGreen,1);
> Plot(s1, "Support 1 - ",colorDarkGreen,1);
> Plot((s3+s2)/2, "Mid Value of S2 & S3 ",colorWhite,1);
> Plot((s1+s2)/2, "Mid Value of S1 & S2 - ",colorWhite,1);
> Plot((pivot+s1)/2, "Mid Value of S1 & Pivot ",colorWhite,1);
> }
>
> //---------------------------------------------------------------------------
> // Printing the pivot level in interpretation window
> //---------------------------------------------------------------------------
>
>
> printf(Name()+ "\n\nResistance - 3 | %g\nResistance - 2 |
> %g\nResistance - 1 | %g\n" +
> "Pivot | %g\nSupport - 1 | %g\nSupport - 2 |
> %g\nSupport - 3 | %g",
> r3,r2,r1,pivot,s1,s2,s3);
>
>
> //---------------------------------------------------------------------------
> // This section is for Exploration
> //---------------------------------------------------------------------------
>
> Filter = 1;
> AddColumn(r3,"Resistance 3");
> AddColumn(r2,"Resistance 2");
> AddColumn(r1,"Resistance 1");
> AddColumn(Pivot,"Pivot");
> AddColumn(s1,"Support 1");
> AddColumn(s2,"Support 2");
> AddColumn(s3,"Support 3");
>
> //---------------------------------------------------------------------------
> // Add Pivot levels along with the title
> //---------------------------------------------------------------------------
>
> _N(Title = EncodeColor(colorBrown)+ StrFormat("{{NAME}} - {{INTERVAL}}
> {{DATE}} Open %g, Hi %g, Lo %g, Close %g(%.1f%%)\n"+
> EncodeColor(4)+"Resistance 3 -=- %g ::::: Resistance 2 -=- %g :::::
> Resistance 1 -=- %g :::::"+
> EncodeColor(colorGreen)+" Pivot -=- %g"+
> EncodeColor(29)+"\nSupport 1 -=- %g ::::: Support 2 -=- %g :::::
> Support 3 -=- %g\n ",
> O, H, L, C,SelectedValue( ROC( C, 1 ) ),r3,r2,r1,pivot,s1,s2,s3));
>
> //---------------------------------------------------------------------------
> // End of Pivot Point
> //---------------------------------------------------------------------------
>
> _SECTION_END();
>
>
>
> reinsley a écrit :
>> Woozi, Thanks for sharing
>>
>> Many variables not initialized...
>>
>> Best regards
>>
>>
>> wooziwog a écrit :
>>>
>>> Tim,
>>>
>>> The following uses AB functions for plotting intraday pivots.
>>> You can modify it to suit your needs.
>>> I am using version 5.2.9.2. If you have any problems with it check for
>>> line wrapping, I copied it from my intraday chart and tested it.
>>>
>>> David K.
>>>
>>> //======================
>>> _SECTION_BEGIN("Chart Settings");
>>> //======================
>>> SetChartOptions(0, chartShowDates);
>>> SetChartBkColor(1);
>>> GraphXSpace=Param("GraphXSpace",15,0,300,1);
>>> dec= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
>>> bc = BarCount-1;
>>> bi = BarIndex();
>>> Lbi = LastValue(bi);
>>> sbi = SelectedValue(BarIndex());
>>> tn = TimeNum();
>>> Plot(C,"",IIf(C>O,34,IIf(C<O,32,55)),128,4);
>>> //======================
>>> pxchartright = Status("pxChartRight");//returns y-coordinate of top-left
>>> corner
>>> //======================
>>> _SECTION_BEGIN("GFX X Conversion");
>>> function tpX(bar) {
>>> lvb = Status("LastVisibleBar");
>>> fvb = Status("FirstVisibleBar");
>>> pxchartleft = Status("pxChartLeft");
>>> pxchartright = Status("pxChartRight");
>>> pxheight = Status("pxheight");
>>> pxchartwidth = Status("pxChartWidth");
>>> return pxchartleft+(bar-fvb)*pxchartwidth/(Lvb-fvb+1); }
>>> _SECTION_END();
>>> //======================
>>> _SECTION_BEGIN("GFX Y Conversion");
>>> function tPY(Value) {
>>> local Miny, Maxy, pxchartbottom, pxchartheight;
>>> Miny = Status("AxisMiny");
>>> Maxy = Status("AxisMaxy");
>>> pxchartbottom = Status("pxChartBottom");
>>> pxchartheight = Status("pxChartHeight");
>>> return pxchartbottom - floor(0.5
>>> +(Value-Miny)*pxchartheight/(Maxy-Miny)); }
>>> _SECTION_END();
>>> //======================
>>> _SECTION_BEGIN("GFX Text+Label, GFX Y, Std X");
>>> //======================
>>> dec=0; ha=0;
>>> procedure gtx(val,color,string,xpos) {
>>> GfxSetTextColor(color);
>>> gtext=GfxDrawText(NumToStr(val,dec)+"-"+
>>> StrExtract(string,0)+" ",xpos,tpY(SelectedValue(val))+ha,0,0,256);
>>> return gtext; }
>>> _SECTION_END();
>>> //======================
>>> _SECTION_BEGIN("Plot Shapes");
>>> //======================
>>> procedure plshp(x,y,shape,color,shift)
>>> { PlotShapes(IIf(BarIndex()==x,shape,0),color,0,y,shift); }
>>> //======================
>>> lls=0; sln=0;
>>> procedure hrplt(tf,value,color,sty,shf) {
>>> Lin=LineArray(Lbi-lls-shf,LastValue(value),
>>> Lbi+shf,LastValue(value),1);
>>> Plot(IIf(tf AND sln==0,value,Null),"",color,sty,0,0,shf);
>>> Plot(IIf(sln==1,Lin,Null),"",color,sty,0,0,shf); }
>>> //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> _SECTION_BEGIN("Intraday Time Pivots");
>>> //===============================
>>> ipv = ParamList("Sup Res
>>> Pivots","Off|All|Calculate||OHLC|Lines|Labels",3);
>>> psh= ParamToggle("Plot Shapes", "Off|On",0);
>>> htx = Param("Text Shift",18,-200,150,1);
>>> sln= ParamToggle("Short Lines", "Off|On",1);
>>> lls = Param("Short Line Length",3,0,500,1)*10;
>>> shf = Param("Shift Line Right",2,0,50,1);
>>> rsc = ParamToggle("No Rescale","Off|On",1);
>>> sty = ParamStyle("Style",4096);
>>> optn= Param("Market Open",93000,00000,235959,000500);
>>> cltn= Param("Market Close",161500,00000,235959,000500);
>>> plsi= Param("Start Plotting",083000,00000,240000,000500);
>>> plei= Param("End Plotting",161500,00000,240000,000500);
>>> //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> //Time and Dates
>>> begD = DateNum() != Ref(DateNum(),-1);//Begin New Day
>>> fboD = LastValue(ValueWhen(begD,bi,1));//First Bar of Day
>>> endD = DateNum() != Ref(DateNum(), 1);//End of Day
>>> lboD = LastValue(ValueWhen(endD,bi,1));//Last Bar of Day
>>> lbpd = LastValue(ValueWhen(begD,bi,2)-1);//Last Bar of Previous Day
>>> tday = DateNum()==LastValue(DateNum(),1);//Includes current fbod to
>>> future lbod
>>> pdaz= ValueWhen(begD,Ref(DateNum(),-1),1);//All bars prior to existing
>>> lbod
>>> prdaz=pdaz AND NOT tday;
>>> notda= NOT tday;
>>> //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> function tvy(tstart,tframe,array) {
>>> if(array==1)y = ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
>>> if(array==2)y = ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
>>> y0=IIf(y>0,y,Null);
>>> return y0; }
>>> //======================
>>> function xbar(tstart,tframe,array) {
>>> if(array==1) {
>>> y=ValueWhen(tframe,HighestSince(Cross(tn,tstart),H),1);
>>> x=BarIndex()==ValueWhen(tframe AND H==y,bi);
>>> x0=bc-LastValue(BarsSince(x>0),1); }
>>> if(array==2) {
>>> y=ValueWhen(tframe,LowestSince(Cross(tn,tstart),L),1);
>>> x=bi==ValueWhen(tframe AND L==y,bi);
>>> x0=bc-BarsSince(x>0); }
>>> return x0; }
>>> //==============
>>> if(ipv=="All" OR ipv=="Calculate" OR ipv=="Lines" OR ipv=="Labels" OR
>>> ipv=="OHLC") {
>>> pmtn = optn-010000; premkt = tn >= pmtn AND tn <= optn;
>>> mk05 = optn+000500; tfrm05 = tn>=optn AND tn<= mk05;
>>> mk15 = optn+001500; tfrm15 = tn>=optn AND tn<= mk15;
>>> mk30 = optn+003000; tfrm30 = tn>=optn AND tn<= mk30;
>>> mk45 = optn+004500; tfrm45 = tn>=optn AND tn<= mk45;
>>> mk60 = optn+010000; tfrm60 = tn>=optn AND tn<= mk60;
>>> mkss = 110000;
>>> mkse = 133000; tfrslo = tn>=mkss AND tn<= mkse;
>>> va30 = 154500; tfva30 = tn>=va30 AND tn<= cltn;
>>> va2h = cltn-020000; tf2hrs = tn>=va2h AND tn<= cltn;
>>> mktHrs = tn>=optn AND tn<= cltn;
>>> pltval = tn>=plsi AND tn<= va2h;
>>> //======================
>>>
>>> cyHi = HighestSince(bi==fbod,H);
>>> cxHi = ValueWhen(tday AND H==cyHi,bi);
>>> cyLo = LowestSince(bi==fbod,L);
>>> cxLo = ValueWhen(tday AND L==cyLo,bi);
>>> pyHi = ValueWhen(prdaz,HighestSince(bi==lbpd,H),1);
>>> pxHi = ValueWhen(H==pyHi AND NOT tday ,bi);
>>> pyLo = ValueWhen(prdaz,LowestSince(bi==lbpd,L),1);
>>> pxLo = ValueWhen(L==pyLo AND NOT tday,bi);
>>> mkOp = ValueWhen(Cross(tn,cltn),O,1);
>>> xmOp = bc-BarsSince(Cross(tn,optn)>0);
>>> mkCl = ValueWhen(Cross(TimeNum(),160000),C);
>>> xmCL = bc-BarsSince(Cross(TimeNum(),160000)>0);
>>> xpmk = bc-BarsSince(Cross(tn,optn)>0);
>>> //======================
>>> poHi=tvy(pmtn,premkt,1); poLo=tvy(pmtn,premkt,2);
>>> mkHi=tvy(optn,mktHrs,1); mkLo=tvy(optn,mktHrs,2);
>>> Hi05=tvy(optn,tfrm05,1); Lo05=tvy(optn,tfrm05,2);
>>> Hi15=tvy(optn,tfrm15,1); Lo15=tvy(optn,tfrm15,2);
>>> Hi30=tvy(optn,tfrm30,1); Lo30=tvy(optn,tfrm30,2);
>>> Hi60=tvy(optn,tfrm60,1); Lo60=tvy(optn,tfrm60,2);
>>> vH2h=tvy(va2h,tf2hrs,1); vL2h=tvy(va2h,tf2hrs,2);
>>> vH30=tvy(va30,tfva30,1); vL30=tvy(va30,tfva30,2);
>>> ACDos = (Hi15- Lo15) * 0.50;
>>> ACDHi=Hi15+ACDos; ACDLo=Lo15-ACDos;
>>> dRange = cyHi - cyLo;
>>> mRange = mkHi - mkLo;
>>> }
>>> //===================
>>> sty1=8|sty|rsc*2048; sty2=32|sty|rsc*2048;
>>> tfplt = TimeNum()>=plsi AND TimeNum()<=plei;
>>> if(ipv=="All" OR ipv=="Lines" OR ipv=="OHLC") {
>>> hrplt(tfplt,mkOp,29,sty1,shf); hrplt(tfplt,mkCl,55,sty1,shf);
>>> hrplt(tfplt,poHi,10,sty1,shf); hrplt(tfplt,poLo,10,sty1,shf);
>>> hrplt(tfplt,mkHi,32,sty1,shf); hrplt(tfplt,mkLo,34,sty1,shf);
>>> hrplt(tfplt,pyHi,25,sty1,shf); hrplt(tfplt,pyLo,51,sty1,shf);
>>> }
>>> if(ipv=="All" OR ipv=="Lines") {
>>> hrplt(tfplt,Hi05,27,sty2,shf); hrplt(tfplt,Lo05,27,sty2,shf);
>>> hrplt(tfplt,Hi15,42,sty2,shf); hrplt(tfplt,Lo15,42,sty2,shf);
>>> hrplt(tfplt,Hi30,11,sty2,shf); hrplt(tfplt,Lo05,11,sty2,shf);
>>> hrplt(tfplt,Hi60,36,sty2,shf); hrplt(tfplt,Lo60,36,sty2,shf);
>>> hrplt(tfplt,vH2h,33,sty2,shf); hrplt(tfplt,vL2h,34,sty2,shf);
>>> hrplt(tfplt,vH30,25,sty2,shf); hrplt(tfplt,vL30,51,sty2,shf);
>>> hrplt(tfplt,ACDHi,42,sty1,shf); hrplt(tfplt,ACDLo,42,sty1,shf);
>>> }
>>> //===================
>>> GfxSelectFont("Tahoma",10,400); GfxSetBkColor(16); GfxSetOverlayMode(1);
>>> GfxSetBkMode(2);
>>> xp=Min(tpX(htx+sbi),pxchartright-80); ha=-5;
>>> if(ipv=="All" OR ipv=="Labels" OR ipv=="OHLC") {
>>> gtx(vH2h,33,"vH2h",xp); gtx(vL2h,34,"vL2h",xp); gtx(vH30,25,"vH30",xp);
>>> gtx(vL30,51,"vL30",xp);
>>> gtx(mkOp,10,"mkOp",xp); gtx(mkCl,55,"mkCl",xp); gtx(pyHi,25,"prHi",xp);
>>> gtx(pyLo,51,"prLo",xp);
>>> }
>>> if(ipv=="All" OR ipv=="Labels") {
>>> gtx(poHi,10,"preH",xp); gtx(poLo,10,"PreL",xp); gtx(mkHi,32,"mkHi",xp);
>>> gtx(mkLo,34,"mkLo",xp);
>>> gtx(Hi05,27,"Hi05",xp); gtx(Lo05,27,"Lo05",xp); gtx(Hi15,42,"Hi15",xp);
>>> gtx(Hi30,11,"Hi30",xp);
>>> gtx(Lo30,11,"Lo30",xp); gtx(Hi60,36,"Hi60",xp); gtx(Lo60,36,"Lo60",xp);
>>> }
>>> //===========================
>>> up=shapeStar; dn=shapeStar; shp=shapeNone;
>>> os=30;
>>> //======================
>>> if(psh==1) {
>>> xoHi=xbar(pmtn,premkt,1); plshp(xoHi,preH,dn,10, os);
>>> xoLo=xbar(pmtn,premkt,2); plshp(xoLo,preL,up,10,-os);
>>> xmHi=xbar(optn,mktHrs,1); plshp(xmHi,mkHi,dn,32, os+10);
>>> xmLo=xbar(optn,mktHrs,2); plshp(xmLo,mkLo,up,34,-os+10);
>>> xH05=xbar(optn,tfrm05,1); plshp(xH05,Hi05,dn,51, os);
>>> xL05=xbar(optn,tfrm05,2); plshp(xL05,Lo05,dn,34,-os);
>>> xH15=xbar(optn,tfrm15,1); plshp(xH15,Hi15,up,42, os+15);
>>> xL15=xbar(optn,tfrm15,2); plshp(xL15,Lo15,up,42,-os+15);
>>> xH30=xbar(optn,tfrm30,1); plshp(xH30,Hi30,dn,11, os+10);
>>> xL30=xbar(optn,tfrm30,2); plshp(xL30,Lo30,up,11,-os+10);
>>> xH60=xbar(optn,tfrm60,1); plshp(xH60,Hi60,dn,36, os);
>>> xL60=xbar(optn,tfrm60,2); plshp(xL60,Lo60,up,36,-os);
>>> xvH2=xbar(va2h,tf2hrs,1); plshp(xvH2,vH2h,dn,34, os);
>>> xvL2=xbar(va2h,tf2hrs,2); plshp(xvL2,vL2h,up,33,-os);
>>> xvH3=xbar(va30,tfva30,1); plshp(xvH3,vH30,dn,43, os);
>>> xvL3=xbar(va30,tfva30,2); plshp(xvL3,vL30,up,25,-os);
>>> }
>>> //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> _SECTION_BEGIN("Market Markers");
>>> //===============================
>>> mkrs= ParamToggle("Plot Markers", "Off|On",0);
>>> if(mkrs==1) {
>>> VbarO = Cross(TimeNum(),optn);
>>> VbarC = Cross(TimeNum(),cltn);
>>> Plot(VbarO,"",10,2|32|styleOwnScale|4096|4);
>>> Plot(VbarC,"",55,2|32|styleOwnScale|4096|4);
>>> }
>>> _SECTION_END();
>>> //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> Title = EncodeColor(55)+ Title = Name() + " " + EncodeColor(32) + Date()
>>> + " " + EncodeColor(5) + "{{INTERVAL}} " +
>>> //Title = EncodeColor(55)+ Date() + " Tick = " + EncodeColor(5) +
>>> Interval()+
>>> EncodeColor(55)+ " Open = "+ EncodeColor(52)+ WriteVal(O,dec) +
>>> EncodeColor(55)+ " High = "+ EncodeColor(5) + WriteVal(H,dec) +
>>> EncodeColor(55)+ " Low = "+ EncodeColor(32)+ WriteVal(L,dec) +
>>> EncodeColor(55)+ " Close = "+ EncodeColor(52)+ WriteVal(C,dec) +
>>> EncodeColor(55)+ " Volume = "+EncodeColor(52)+ WriteVal(V,1.0) +
>>> EncodeColor(55)+ " bi= "+EncodeColor(42)+ WriteVal(sbi,1) +
>>> EncodeColor(55)+ " Bar to End = "+ EncodeColor(10)+
>>> WriteVal(Lbi-sbi,1.0);
>>>
>>> --- In amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>,
>>> "Tim" <timkthung@xxx> wrote:
>>> >
>>> > Thanks de again. Let me try to figure out something.
>>> >
>>> >
>>> > From: de_techneut
>>> > Sent: Friday, December 04, 2009 6:50 AM
>>> > To: amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>
>>> > Subject: [amibroker] Re: SUPER PIVOT POINTS
>>> >
>>> >
>>> >
>>> > Hi Tim, I am also just getting to know Amibroker and AFL, the .dll
>>> was not written by me. I would like to ask more experienced users to
>>> help a hand here. I can tell you the logic in the code but implementing
>>> it and getting nothing but green (no errors ) is a bridge to far for me
>>> now. the logic to be used could be : determine the highest high of a
>>> period the lowest low and the close. calculate your pivots
>>> >
>>> >
>>> >
>>> > use deFlagTimeRange( starttime, endtime) to mark your market open and
>>> you market close
>>> >
>>> >
>>> > then something like
>>> >
>>> >
>>> > openmarket=deFlagTimeRange( starttime, endtime);
>>> >
>>> >
>>> > highofmarket=null;//initialisation
>>> > lowofmarket=null;//initialisation
>>> > if (openmarket)
>>> > {
>>> > highofmarket=iif(h>highofmarket,h,highofmarket);
>>> > lowofmarket=iif(l<lowofmarket,l,lowofmarket);
>>> > marketpivot= (highofmarket+ lowofmarket+c)/3;
>>> > suport1=(marketpivot*2)-highofmarket;
>>> > resistance1=(marketpivot*2)-lowofmarket;
>>> > /* and so on */
>>> > }
>>> > this is just of the top of my head, i haven't tested this code ( i
>>> doubt it works but maybe you get the idea and can take it further.
>>> >
>>> >
>>> > Kind regards
>>> > Marc
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > --- In amibroker@xxxxxxxxxxxxxxx
>>> <mailto:amibroker%40yahoogroups.com>, "Tim" <timkthung@> wrote:
>>> >
>>> >
>>> > >
>>> > > Thanks de. I had downloaded it. Would you please show me how to use
>>> it.
>>> > >
>>> > >
>>> > > From: de_techneut
>>> > > Sent: Thursday, December 03, 2009 11:29 PM
>>> > > To: amibroker@xxxxxxxxxxxxxxx <mailto:amibroker%40yahoogroups.com>
>>> > > Subject: [amibroker] Re: SUPER PIVOT POINTS
>>> > >
>>> > >
>>> > >
>>> > > Hi Tim, it is possible to do that with the use of a plugin called
>>> deDATETIME. it has functions which enables you to define your own time
>>> interval hope this helps. Marc
>>> > > --- In amibroker@xxxxxxxxxxxxxxx
>>> <mailto:amibroker%40yahoogroups.com>, "Tim" timkthung@ wrote:
>>> > > >
>>> > > > Hello everybody,
>>> > > > Would anyone please tell me whether we could define the cutting
>>> time in calculating the daily pivots for the next day.
>>> > > > I raise this issue because of my time-zone difference from the NY
>>> stock exchange.
>>> > > > Much appreciate if anyone could help.
>>> > > >
>>> > > > Tim
>>> > > >
>>> > >
>>> >
>>>
>>>
>>
>>
>> ------------------------------------
>>
>> **** IMPORTANT PLEASE READ ****
>> This group is for the discussion between users only.
>> This is *NOT* technical support channel.
>>
>> TO GET TECHNICAL SUPPORT send an e-mail directly to
>> SUPPORT {at} amibroker.com
>>
>> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
>> http://www.amibroker.com/feedback/
>> (submissions sent via other channels won't be considered)
>>
>> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> http://www.amibroker.com/devlog/
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> **** IMPORTANT PLEASE READ ****
> This group is for the discussion between users only.
> This is *NOT* technical support channel.
>
> TO GET TECHNICAL SUPPORT send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> http://www.amibroker.com/feedback/
> (submissions sent via other channels won't be considered)
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> Yahoo! Groups Links
>
>
>
>
>
> ------------------------------------
>
> **** IMPORTANT PLEASE READ ****
> This group is for the discussion between users only.
> This is *NOT* technical support channel.
>
> TO GET TECHNICAL SUPPORT send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> http://www.amibroker.com/feedback/
> (submissions sent via other channels won't be considered)
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
amibroker-digest@xxxxxxxxxxxxxxx
amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|